CONTROL JOINT Floor to Floor | Floor to Wall 8 - 9 mm ( 5/16 - 3/8” ) Joint Width Features Surface Easy transit: Americans with Disabilities Act (ADA) compliant across the entire movement cycle 8mm minimum visible line width between finishes VAMAC versions of these joints are London Underground Limited 1-085 ‘Fire Safety Performance of Materials’ tested and approved for below ground applications such as metro stations. Micratec : Ti-Lock NA/VA Micratec : Ti-Lock NP/VP Movement Good movement capacity System Options Sightline width(s) Height(s) Metal type(s) Metal thickness(es) Seal colour(s) Fire barrier Waterproofing Pre-assembly in factory 8, 9 mm 8, 10, 13, 15 mm 304-grade Stainless Steel 316-grade Stainless Steel 1005A Aluminium CZ 108 Brass 1.0, 1.5mm Black (RAL 7021) NEOPRENE/VAMAC Grey (RAL 7038) NEOPRENE/VAMAC Beige (RAL 1015) NEOPRENE/VAMAC Not applicable Not applicable Not applicable APPLICATIONS Airport Terminals | Educational | Exhibition Centres Department Stores | Distribution &  Retail Warehouses Factories | Hospitals | Museums | Offices & Hotels Parking | Places of Worship | Residential Buildings Rail, Metros & Elevated Rail Stations | Roads & Bridges Shopping Centres | Sports Stadiums | Supermarkets | United Kingdom | T : +44 (0) 3707 876 543 | E : [email protected] | W : www.vexcolt.com

CONTROL JOINT Floor to Floor | Floor to Wall 8 - 9 mm ( 5/16 - 3/8” ) Joint Width Micratec : Ti-Lock NA/VA Micratec : Ti-Lock NP/VP Control Joint Selection Criteria Joint Load Rating Product Details Floor - Floor NEOPRENE Floor - Wall NEOPRENE Floor - Floor VAMAC Floor - Wall VAMAC Eurocode Rating When specifying or ordering please add the height (H1) required to the Product Reference. For example Micratec : Ti-Lock NA-008-010 denotes a control joint suitable for paving ≤10mm deep laid onto an adhesive bed. When specifying or ordering please select metal side plates from aluminium, 304-grade...