SPECIAL TREATMENTS FAÇADE SYSTEM arcoPlus® VT 4243 Al straight tubolar profile 32 mm Created with polycarbonate panels linked together through connector joints, this system is equipped with a wide range of accessories to offer greater versatility in application. Brackets, flaps, seals, junction connectors, and frame profiles prevent water infiltration on flat, vertical surfaces no matter what the size. With the variety in treatments and colors, it is possible to customize the panel to any application need, making the VTfaçade system suitable for any design requirements. 4760 Aluminum “Y” wall fixing bracket for 4243 4871 Al “L” wall fixing bracket for facade system 4140C/4271/4800 + flap Aluminum base/side profile with flap frontal opening AB-ABSOLUTE Polycarbonate panels used for ventilated façades can be produced with the innovative AB-Absolute treatment. This treatment creates an opaque surface on the side of the panel facing the masonry while maintaining the transparent effect on the outside. Customized colors can be applied to the opaque or translucent surface. CALEIDO PROJECT To meet architectural design requirements, the Caleido project was formed to focus on the creation of custom colors. This project made it is possible to create an infinite range of color straying from the tradition few. These production capabilities help bring form to all architectural aspirations. IR treated panels can absorb portions of sun rays within infrared spectrum (780-1400nm), blocking out solar heat while bringing in light. This product can reduce the internal increase in temperature caused by the greenhouse effect by up to 25%, to help keep a comfortable indoor climate. UV-MATT arcoPlus® 684/626/9207/9327 Polycarbonate panel Insulation Thermal insulation layer extra VENTILATED FAÇADE BENEFITS The Ventilated Facade System is an “intelligent” external envelope that optimizes the indoor environment and protects the building structure. The external cladding of polycarbonate mounted with enough space creates micro-ventilation, allowing moisture and thermal energy to escape easily with airflow. During summer months this system acts as a thermal shield, keeping inside temperatures constant and energy bills reduced. An additional insulation layer can be added between the inside cavity and the building structure during winter months. The Ventilated Facade is an alternative eco-sustainable solution for both new design projects and building redevelopment to increase aesthetic value. • • • • • • • healtly indoor living spaces masonry imperfections hidden dry and healtly masonry walls natural air-ventilation indoor constant temperature more performing coating insulation water-repellent outer wall cladding climate/living comfort ANTI-REFLECTIVE LIGHT DIFFUSION UV-TECH SOLAR EXPOSURE WARRANTY arcoPlus® with UV-Tech Treatment is covered by an extended warranty up to 15 years. This is due to an improved UV coextrusion on the external side that is more chemically stable and effective over time. They guarantee greater protection against damage caused by extended solar radiation exposure. AG ANTI-SCRATCH & ANTI-GRAFFITI For locations where polycarbonate panels are at risk for vandalism such as spray paint or surface scratching, AGAnti-graffiti coating is the solution. AG is a coating applied to polycarbonate to create an anti-scratch and anti-graffiti surface to repel oil and water so that it cannot penetrate into the substrate allowing for easy removal. ONE PANEL | TWO COLORS The acroPlus® panels can be produced with two different color layers to ensure long-lasting external color retention. This product makes it possible to maintain a visual comfort with light diffusion in the indoor environment, while also having an attractive outdoor façade full of bright colors. UV matt is UV ray protection with a matt finish coextruded into the external surface of the panel. This coextrusion gives your project a non-reflective finish rather than the normal reflective surface you would have with transparent building envelopes. This process allows the diffusion of light through its surface, while getting rid of sun glares and reflections. Modular connector system for multiwall polycarbonate LIVING COMFORT Curtain wall cladding Ventilated façade AB-ABSOLUT TREATMENT Polycarbonate panels, used for ventilated façades construction, can be produced using the innovative AB-Absolut coextrusion process. This treatment makesopaque the side panel facing the wall, maintaining the usual polycabonate transparency on the external side. Furthermore, there is the possibility to realize the opaque coextrusion in different colors, according to the project creativity. Important: data contained in this document is provided in good faith with promotional/sales goals and it can be changed without notice. For further details contact directly our staff by phone or write e-mail to [email protected]. Strada Carignano 104 - 10040 La Loggia (Turin) Italy tel. +39 011 962 81 77 - fax +39 011 962 83 6

LOAD RESISTANCE THERMAL INSULATION WALL BUILDING Modular connector system composed of UV protected multiwall polycarbonate panels for façade installation and wall cladding SPECIAL TREATMENTS PRODUCTION STANDARDS Panel Thickness (mm) Structure (walls) Effective modular width (mm) TECHNICAL FEATURES Thermal transmittance U (W/m2K) 3,0 Linear thermal expansion Temperature range U.V. rays protection Fire reaction EN 13501-1 ArcoPlus®VT is a modular system specially designed for façade cladding and ventilated façades. It can be composed of four different types of modular multiwall polycarbonate panels...