Pull Down and Back Extension

Product catalog summary

Product Overview:
The SD11 Pull Down and Back Extension machine is designed for strength and endurance training, suitable for wheelchair users and can accommodate one or two users simultaneously. It targets shoulder, back, arm, and abdominal muscles.

Specifications:

Dimensions: Length 1665 mm, Width 655 mm, Height 1590 mm
Weight: 75 KGS
Maximum User Weight: 120 KGS
Safety Zone: 4760mm x 3615 mm

Usage Instructions:

Start with the pull-up station facing away from the center post.
Perform repetitions by pulling up the bars.
Move to the back extension station, position arms on rests, and push up for repetitions.
Lift legs to engage abdominal muscles.

Safety Guidelines:

For users aged 14 and above.
Consult a physician before starting any workout routine.
Discontinue use if equipment becomes unstable or if exercise is painful.
Wear appropriate clothing and footwear; remove jewelry.
Use handgrips during exercise and when entering/exiting equipment.

Maintenance Plan:
Adheres to DIN 79000 standards, requiring documented inspections:

Weekly Routine Inspection: Check for damage, loose bolts, exposed foundation, and ensure safety surfacing is intact.
Monthly Operational Inspection: Includes weekly checks plus torsion system functionality, excessive wear, and corrosion checks.
Annual Inspection: Includes monthly checks, ensuring products are securely fixed to foundations and inspecting welds.

Catalog excerpts

Back Extension Product Manual Distribution and Maintenance Vertical Technik AG,

Open the catalog to page 1

This machine is for use with wheelchairs. It can be used from one or two persons at the same time. Begin with the pull up station by positioning yourself facing away from center post Begin to exercise pulling up the bars for repetitions Next, position yourself on the back extension station with arms positioned on rests and begin to exercise pushing yourself up Lift legs for repetitions to work the abdominal muscles Please note! Only for use by persons 14 years and older. Consult a physician before you begin this or any workout rouitne. If equipment should become unstable, immediately discontinue...

Open the catalog to page 2

SD 11 Pull Down and Back Extension: General Information: Length: Required Safety Zone: Maximum User Weight: Torsion System: Pull-up station. Muscles Exercised: Shoulder, back, arm and abdominal muscle groups. Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00

Open the catalog to page 3

Safety Zones: Safety zones of all products are given in the following pages. Please note that the products should be assembled in such a manner that safety zones of the products should not intersect. The illustrations given below try to explain this point. Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00

Open the catalog to page 4

Safety Zone for SD 11 Pull Down and Back Extension: A. The bolts of the ground anchor is free of any concrete. Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00

Open the catalog to page 5

Maintenance Plan: The following maintenance plan is according to DIN 79000. According to DIN 79000, it is the duty of the customer to comply with the following plan and document all inspections. The person performing the inspection should be competent to do so. Any failure may result in the product not being according to DIN 79000 and may void warranties. Also adhering to the maintenance plan will make your products last longer. Please contact us in case you need any assistance. The inspection is divided into three parts depending on the frequency of the inspection; weekly routine, monthly operational...

Open the catalog to page 6

Annual Inspection: Perform monthly operational inspection. Make sure the products are fixed to the foundations. It may be a good idea to remove the post covers and retighten the bolts that fix the structure to the foundation. Check the central post for any wear. Check all welds. Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00

Open the catalog to page 7

All Vertical Technik AG catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list