Oblique Station
7Pages

Oblique Station SD01 Product Manual Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00

This machine can be used from one, two or three persons at the same time. Begin in the seated position facing the center post Grip support and twist from side to side for repetitions Next, position yourself on one of the two discs gripping the center support for balance Twist from side to side for repetitions This exercise station will work your abdominals. Please note! • • • • • • • Only for use by persons 14 years and older. Consult a physician before you begin this or any workout rouitne. If equipment should become unstable, immediately discontinue use and report to authorised personnel....

General Information: Length: Required Safety Zone: Fall Height: Maximum User Weight: Sitting Oblique Station (1 Station) Standing Oblique Station (2 Stations) Torsion System: All Activities Have the Torsion System with a stopper at 30 degrees Muscles Exercised: Abdominal Muscle Groups Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00

Safety Zones: Safety zones of all products are given in the following pages. Please note that the products should be assembled in such a manner that safety zones of the products should not intersect. The illustrations given below try to explain this point. Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00

Safety Zone for SD 01 Oblique Station: Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00

Maintenance Plan: The following maintenance plan is according to DIN 79000. According to DIN 79000, it is the duty of the customer to comply with the following plan and document all inspections. The person performing the inspection should be competent to do so. Any failure may result in the product not being according to DIN 79000 and may void warranties. Also adhering to the maintenance plan will make your products last longer. Please contact us in case you need any assistance. The inspection is divided into three parts depending on the frequency of the inspection; weekly routine, monthly...

Annual Inspection: • • • Perform monthly operational inspection. Make sure the products are fixed to the foundations. It may be a good idea to remove the post covers and retighten the bolts that fix the structure to the foundation. Check the central post for any wear. Check all welds. Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00