*myarchiexpo

Dual Air Walker

Product catalog summary

Product Overview:
The SD09 Dual Air Walker is a fitness machine designed for use by one or two persons simultaneously. It targets muscle groups in the shoulders, back, arms, and legs, enhancing strength, endurance, and coordination. Users should position their feet on the plates and grip the handles to begin exercising by sliding their feet in tandem with their arms.

Specifications:

Dimensions: Length 1565 mm, Width 1350 mm, Height 1560 mm
Weight: 150 kg
Maximum User Weight: 120 kg
Number of Users: 2
Safety Zone: 4350 mm - 4565 mm
Fall Height: Less than 600 mm
Torsion System: Includes a stopper at 30 degrees

Safety Instructions:

Recommended for users aged 14 and above.
Consult a physician before starting any workout routine.
Discontinue use if equipment becomes unstable and report to authorized personnel.
Wear appropriate clothing and footwear; remove all jewelry.
Use handgrips during exercise and when entering/exiting the equipment.

Maintenance Plan:
The maintenance plan follows DIN 79000 standards and includes weekly, monthly, and annual inspections. It is crucial to document all inspections and ensure repairs are made promptly to prevent accidents and maintain warranty validity.

Weekly Routine Inspection: Check for damage, loose bolts, exposed foundations, and ensure smooth movement of parts. Inspect safety surfacing and product markings.
Monthly Operational Inspection: Repeat weekly checks, ensure the torsion system functions properly, check for excessive wear, corrosion, and secure all components.
Annual Inspection: Perform monthly checks, ensure products are securely fixed to foundations, and inspect central posts and welds for wear.

Catalog excerpts

Dual Air Walker SD09 Product Manual Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00

Open the catalog to page 1

This machine can be used from one or two persons at the same time. Position your feet on plates and grip handles Begin exercise by sliding feet in tandem with arms This exercise will work the muscle groups of your shoulders, back, arms and legs. Please note! • • • • • • • Only for use by persons 14 years and older. Consult a physician before you begin this or any workout rouitne. If equipment should become unstable, immediately discontinue use and report to authorised personnel. Inappropriate use of the equipment could result in personal injury. Please follow recommended use and stop if exercise...

Open the catalog to page 2

General Information: Length: Required Safety Zone: Fall Height: Maximum User Weight: Torsion System: Air Walkers have the Torsion System with a stopper at 30 Degrees. Muscles Exercised: Shoulders, Back, Arms and Leg Muscles. Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00

Open the catalog to page 3

Safety Zones: Safety zones of all products are given in the following pages. Please note that the products should be assembled in such a manner that safety zones of the products should not intersect. The illustrations given below try to explain this point. Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00

Open the catalog to page 4

Safety Zone for SD 09 Dual Air Walker: A. The ground anchor is flat and centers the concrete. Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00

Open the catalog to page 5

Maintenance Plan: The following maintenance plan is according to DIN 79000. According to DIN 79000, it is the duty of the customer to comply with the following plan and document all inspections. The person performing the inspection should be competent to do so. Any failure may result in the product not being according to DIN 79000 and may void warranties. Also adhering to the maintenance plan will make your products last longer. Please contact us in case you need any assistance. The inspection is divided into three parts depending on the frequency of the inspection; weekly routine, monthly operational...

Open the catalog to page 6

Annual Inspection: • • • Perform monthly operational inspection. Make sure the products are fixed to the foundations. It may be a good idea to remove the post covers and retighten the bolts that fix the structure to the foundation. Check the central post for any wear. Check all welds. Distribution and Maintenance Vertical Technik AG, Bächliackerweg 6, CH-4402 Frenkendorf, Tel. +41 61 413 28 00

Open the catalog to page 7

All Vertical Technik AG catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list