jjltel aujerm/is)

The philosophy of Guerrasio, the company that has been putting its experience at the service of architecture for over 50 years, was born from the meeting of history, craft tradition and advanced technology. A philosophy summarised in the company vision: technology & ideas for architecture. With three production sites, strategically located in northern, central and southern Italy, the production includes, starting from sheet metal coils, cold working of the sheet by master carpenters, with the support of systems and numerical control machines for bending, pressing, laser cutting and powder coating....

NOISE BARRIERS During the last decades, the noise generated by continuous urban traffic caused by the increase in population, has produced an ever-increasing demand for works to contain noise emissions. Guerrasio company proposes the G-FON line, which responds to every requirement to protect and safeguard against noise generated by the environment. The products range is suitable for all types of sound absorption and insulation in road, residential or production environments. \ G-FON METAL \ G-FON GLASS/PMMA \ G-FON METAL DOOR \ G-FON GLASS/PMMA DOOR

CERTIFICATIONS Guerrasio designs, manufactures and puts on the market exclusively CE marked products, in compliance with the European regulation CPR n. 305/2011. Product performance is assessed and declared for the essential characteristics specified in Regulation EN 14388:2015 and smi. G-FON noise barriers have been acoustically and mechanically tested according to the tests proposed by the regulation at specialised institutes and have obtained all the certifications necessary for placing the product on the market. ROAD AND RAIL TRAFFIC HlWM ClMIIVM Auiimui CMTYf IKACJA STSTlMCw ENTERTAINMENT...

Motorway A8 Milan-Varese From km 33+600 to km 42+400 Macrointerventions 35-36 Municipalities of Jerago Con Orago, Solbiate Arno, Albizzate, Caronno Varesino, Castronno, Brunello, Gazzada Schianno Supply of noise barriers G-FON METAL, G-FON GLASS TRAPEZOIDAL and G-FON DOOR

Motorway A1 Milan-Naples From prog. km 738+300 to km 757+850 Macro-intervention 165-166-167 Municipalities of Naples, Casoria, Afragola, San Marco Evangelista, Caivano, Marcianise, Casagiove Supply of noise barriers G-FON METAL, G-FON GLASS and G-FON DOOR

Brenner Motorway Northern Carriageway From km 192 - northern carriageway Municipality of Rivalta (VR) Design, supply and installation of G-FON METAL sound absorbing panels, extension of HEB beams and closing flashing to increase the sound absorbing surface of the barrier built to protect the town of Rivalta (VR)

Brenner Motorway - Northern Carriageway

Brenner Motorway Southern Carriageway From km 155+020, km 156+300 and km 156+500 in the southern carriageway Design, supply, installation of G-FON GLASS and HEB beams for the repair interventions of noise barriers damaged due to accidents

Brenner Motorway - Southern Carriageway

Motorway A11 Florence-Pisa North From km 54+300 to km 81+700 Macro-interventions 204-205-206-207 Municipalities of Porcari, Capannori, Lucca, Vecchiano Supply of noise barriers G-FON METAL, G-FON PMMA and G-FON DOOR

Motorway A11 Florence-Pisa North

Macro-intervention 149-150-151 Frosinone-Ceccano Macro-interventions 152-153 (Pofi Ceprano) Interventions: 12S-13S-14S-15S.A-15S.B-16S-17S-18S.A-18S.B-19S20S.A-20S.C-20S.E-13N-14N.A-14N.C-15N-16N.A-17N18N-19N-20N-21N G-FON METAL G-FON GLASS

Cotugno Hospital, Naples Insulation of refrigeration machines for the Domenico Cotugno Hospital in Naples. G-FON METAL

Cotugno Hospital, Naples

Acoustic insulation in canning company Private Acoustic Insulation in a canning company plant of Mercato San Severino - Salerno G-FON METAL, G-FON PMMA

Acoustic insulation in canning company

RFI - Italian National Railways Group Railway station of Capua Supply of noise barriers G-FON GLASS

RFI - Italian National Railways Group

G-FON METAL THE SOUND-ABSORBING AND SOUND-INSULATING PANEL Application for road, motorway and railway use G-FON Metal panels are made up of two half-shells in corrugated metal sheet with the edges in a geometry that allows one half-shell to slide into the other. The coupling is carried out by seaming, without any fixing element. The front half-shell is fitted with 10 mm and 8 mm diameter holes arranged in a rhomboidal mesh - short diagonal 14 mm, long diagonal 26 mm - to obtain a void/ full ratio of 37% of the surface. The rear half-shell is unperforated. The sheets undergo pre-treatment with...

G-FON METAL Perforated front half shell The perfect vertical overlap between the panels and the spring effect of the end caps on the studs ensure soundproofing of the system as a whole. Smooth rear half-shell

G-FON GLASS/PMMA THE TRANSPARENT SOUNDPROOFING PANEL Application for road, motorway and railway use Transparent sound barriers are made of laminated glass or PMMA (polymethylmethacrylate) complete with gaskets and perimeter frame. The glass consists of two layers, generally 8 mm thick, laminated together and joined by a transparent, colourless or tinted PVB film. The methacrylate panel, on the other hand, generally 15 mm thick, is made of non-regenerated material that can be either cast or extruded, also colourless or coloured. A rubber gasket (EPDM ) is fitted to the sheets perimeter, followed...

G-FON GLASS/PMMA Eyebolt used for panels handling Panel locking heel between the studs G-FON GLASS on G-FON METAL G-FON GLASS on G-FON GLASS G-FON METAL on G-FON GLASS

G-FON METAL DOOR G-FON G-FON DOOR Eyebolt used for panels handling G-FON GLASS/PMMA DOOR HE Eyebolt used for panels handling G-FON G-FON DOOR

Via Acquedotto, 1 84086 Roccapiemonte (SA) Phone number: +39 081 931788 Fax: +39 081 6200757 [email protected] www.vertebra.com April 2022 edition The technical data contained in this publication are the actual data of the products at the time of printing. In order to improve the technical and functional characteristics and to obtain the best quality/price ratio, Antonio Guerrasio s.r.l. reserves the right to make changes to the products without prior notice. The images contained in this publication are for the sole purpose of presenting the products. For further information, please contact our...