Windscreen
22Pages

Installation manual

Important before mounting 2 1.3 Inground installation with loose upright 10 Subject to misprints, errors and technical modifications. 1803-160223EN(4)

Installation manual windscreen V730 Biarritz Biarritz basic windscreen Standard version, including: • Clear glass 5mm, hardened • Covering caps Type 28.722 2 panels without upper profile Required tools • • • • • Drill Masonry drill 14 mm (depending on installation) Open end wrench or ratchet 17 Phillips head screwdriver Allen key set Subject to misprints, errors and technical modifications. Tape measure Level Pencil Installation instruction

Installation manual windscreen V730 Biarritz Important before installation General warning Installation of this product is at your own risk. Use this installation instruction only as an assistance and only with the installation of this specific product. If you can not install this product yourself, you can always opt for professional installation. Your dealer’s installation team is always ready to assist you. Please be aware of damages Do not use a knife or any other sharp object while opening the packaging. The product could get damaged. Place the product on a soft surface. Please take...

Installation manual windscreen V730 Biarritz 1 Installing Biarritz windscreen. The Biarritz windscreen can be installed on a surface in three different ways: 1. Portable 2. Onground, fixed installation with footplate 3. Inground, fixed installation with separate upright Biarritz with portable foot Onground installation with footplate Inground installation with separate upright Figure 1.1 Installing Biarritz Subject to misprints, errors and technical modifications.

Installation manual windscreen V730 Biarritz 1.1 Portable windscreen If you have a portable Biarritz windscreen, you can place it in any required position as long as the surface is firm and level. Portable feet come in 4 different versions: a. Indoor foot b. Basic foot c. Raised foot d. Reinforced foot Version b, c and d is also available with wheels, with or without brake. Indoor foot Raised foot Raised foot with wheels Reinforced foot with wheels Sizes in mm Figure 1.2 Measurements portable feet Subject to misprints, errors and technical modifications. Basic foot with wheels Reinforced...

Installation manual windscreen V730 Biarritz Installation basic foot and raised foot Follow below steps for installation: 1. Slide the connecting strip in the profile on the left- and right foot. 2. Place the windscreen over the profile onto the foot. Make sure the predrilled holes in the upright of the windscreen are on the same side as the connecting strip. 3. Place two screws in the predrilled holes in the upright an connecting strip to secure the windscreen to the foot. Check if the windscreen is level, horizontally as well as vertically. Tighten the screws. Figure 1.3 Installation...

Installation manual windscreen V730 Biarritz 1.2 Onground installation with footplate Onground installation is done by using a footplate which is mounted onto a concrete surface. The footplates are mounted onto the ground with lag screws. The fixed feet comes in two different versions: a. Ground footplate b. Wall footplate Ground footplate Wall footplate Sizes in mm Figure 1.5 Measurements footplates Subject to misprints, errors and technical modifications.

Installation manual windscreen V730 Biarritz Installation Follow below steps for installation: 1. Slide the connecting strip in the profile onto the left- and right footplate. 2. Place the windscreen over the profile onto the footplate. Make sure the predrilled holes in the upright of the windscreen are on the same side as the connecting strip. 3. Place the windscreen in the desired position. Drill holes into the foundation with a 14mm drill and mount the footplates of the windscreen with plugs and lag screws. 4. Place two screws in the predrilled holes in the upright and connecting strip...

Installation manual windscreen V730 Biarritz Compensating height difference in installation surface To compensate for small height differences in the surface, it is possible to adjust the height of the connecting strip in the profile. The margin is (x) 100 mm. Follow below steps for installation: 1. Slide the connecting strip in the profile onto the left- and right footplate. 2. Place the windscreen over the profile onto the footplate. Make sure the predrilled 2. holes in the upright of the windscreen are on the same side as the connecting strip. Place two screws in the predrilled holes in...

Installation manual windscreen V730 Biarritz 1.3 If the Biarritz is placed on a decking, you can use the special decking footplates. These footplates make it possible to place the windscreen exactly on the edge of the decking. The installation of the decking footplates works the same as in step 1.2 ‘Onground installation’. The necessary installation material depends on the material of your decking. To link several windbreaks, you need to use the loose upright, see 2. ‘Linking the Biarritz windbreaks’. The decking footplates are available in six variants. The type of foot depends on the...

Installation manual windscreen V730 Biarritz 1.3 Inground installation with separate upright With inground installation the windscreen is linked to a loose upright with length (x) which is extended at the bottom with 450 mm. This extended part is shoved into a tube which is recessed mounted into the ground. A covering plate (a) creates a nice cover on the floor. The separate upright comes in three versions: a. In-between profile b. Corner profile c. T-profile The profile choice depends on the way the windscreen is linked (see page 12 ‘Linking Biarritz windscreen’). With the upright with...

Installation manual windscreen V730 Biarritz Installation Follow below steps for installation: 1. Pour the tube fixed in a concrete base in the subsurface. Warning! Make sure you place the right tube in the right upright. Tube with Ø80mm for in-between profile, Ø90mm for corner- and T-profile.. 2. Slide, from below, the covering cap (a) partially over the upright. Do this before you drop the upright into the tube! Warning! Keep the covering cap level when you move it. When the covering cap is pushed crooked over the upright, damage may be caused.. 3. Place the loose upright into the tube...