VTE Tangential fan coil unit
8Pages

TANGENTIAL FAN COIL UNITS

STRUCTURE Galvanized steel sheet (8/10 mm thick) insulated in all parts in direct contact with the conditioned air.Insulated condensate tray made of galvanised steel sheet, complete with drain plug for complete drainage.Sides with knock-outs for fast fixing of accessories. Wall-anchoring slots for easy fixing and levelling of the unit. CONTROL PANEL An integral part of the unit, located within a protected Filtering honeycomb polypropylene fabric enclosed wi- control compartment. Several options are available: thin a metal frame to facilitate withdrawal and cleaning. Filtering rate of the...

DECORATIVE CABINET A wide range of options and accessories is available for Modern design that blends in with any environment. complete requirement satisfaction: Made in hot-dip galvanized steel sheet pre-coated with - 4 pipe systems (main plus auxiliary coil); PVC to ensure high resistance to rust, corrosion, chemi- - Water flow and temperature control with the use cal agents, aliphatic solvents and alcohols. Air grilles made of ABS and the control panel protective flap are inserted in the cabinet top. Standard colour: white. Other RAL colours are available on request. of 3-way or 2-way...

Installation: vertical with cabinet Air intake: bottol Air supply: vertical Installation: vertical with cabinet Air intake: frontal Air supply: vertical Installation: vertical with cabinet Air intake: bottom Air supply: horizontal Installation: horizontal with cabinet Air intake: rear Air supply: horizontal Unit with terminal board Unit with terminal board Unit with air intake socle Installation: horizontal with cabinet Air intake: frontal Air supply: horizontal Installation: vertical concealed Installation: vertical concealed Installation: horizontal concealed Unit with terminal board Unit...

Standard coil Auxiliary coil Fittings Height External dimensions GENERAL DIMENSIONS

2 pipe system (3R coil) W Water pressure drop Water pressure drop Water pressure drop Total cooling capacity Sensible cooling capacity Heating capacity Heating capacity Sound power level Sound pressure level Power input Absorbed current Water content - Standard unit with free outlet: external static pressure = 0 Pa Sound power level: ISO 23741 Sound pressure level: 8,6 dB(A) lower that the sound power level for a room of 90 m3 with a reverberation time of 0,5 sec. Supported power supply: ~230V±10% / 1ph / 50-60Hz COOLING Inlet water temp.: 7°C Outlet water temp.: 12°C Inlet air temp.: 27°C...

4 pipe system (3R+1R coil) W Water pressure drop Water pressure drop Total cooling capacity Sensible cooling capacity Heating capacity Sound power level Sound pressure level Power input Absorbed current Standard unit with free outlet: external static pressure = 0 Pa Sound power level: ISO 23741 Sound pressure level: 8,6 dB(A) lower that the sound power level for a room of 90 m3 with a reverberation time of 0,5 sec. Supported power supply: ~230V±10% / 1ph / 50-60Hz COOLING Inlet water temp.: 7°C Outlet water temp.: 12°C Inlet air temp.: 27°C d.b. - 19°C w.b. HEATING Air temp.: 20°C Inlet...

DP VTE 2014-0 GB A GROUP S.p.A. - Via Montegrappa, 67 - 31020 San Zenone degli Ezzelini (Treviso) - Italy Tel. +39 0423 567774 - Fax +39 0423 567985 - www.aliseogroup.com - info@ventilclima.com