Spirally wound air ducts
50Pages

WOUND DUCTS

Industrial and commercial ventilation (Catalogue no. 1) Energy saving ventilation Air handling units (Catalogue no. 2) Industrial and commercial ventilation components - fans for round and rectangular ducts, sound-insulated, axial and roof fans, air handling units with heat recovery, air heating units, accessories. Energy saving supply and exhaust units and air handling units with heat recovery with air capacity up to 6500 m3/h. Fire and smoke damper KPDU (Catalogue no. 5) Domestic ventilation (Catalogue no. 6) Fire dampers KPDU for smoke protection systems of buildings and premises....

Air handling units AIRVENTS (Catalogue no. 3) Energy saving air handling units with air capacity up to 40 000 m3/h, for use in large residential, industrial and commercial objects. Domestic fans (Catalogue no. 7) Domestic fans with air capacity up to 365 m3/h with extra functions: timer, humidity sensor, motion sensor, etc. Applied for premises up to 30 m2. Energy saving ventilation Geothermal systems GEO VENTS (Catalogue no. 4) Energy saving system GEO VENTS with use of the earth’s surface layers heat. High ventilation system energy efficiency and low operating costs. VENTS VN Mono-pipe...

CATALOGUE SECTION About company 4 Spirally wound air ducts are the best technical solution for ventilation systems’ mounting Spirally wound ducts VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

WELCOME TO THE VENTS WORLD! VENTS company was founded in the nineties of the XXth century. Dynamic development of the enterprise and ongoing study of the consumer demand enabled rapid international leadership of the company in the ventilation industry. VENTS is a powerful research and development enterprise with 2500 professionals working as a single team to ensure a full production cycle from idea to end product. The production base of the company is located at more than 60 000 m2 area. It includes 16 workshops equipped under the latest international standards and each of them is...

Metal processing workshop Spiral air ducts workshop Flexible air ducts workshop Aluminium grilles and diffusers workshop Powder coating workshop Extrusion workshop Injection moulding workshop Residential fans workshop Ventilation grilles workshop Electric motors workshop Industrial fans workshop Air handling units workshop AirVents air handling unit workshop Electrical accessories workshop Extruded grilles workshop Powerful production facilities, high automation level, active implementation of innovative technologies in the production process made VENTS a worldwide ventilation leader. We...

Spirally wound air ducts are the best technical solution for ventilation systems’ mounting Efficiency of spirally wound ducts’ use is conditioned by several factors: first of all high level of aerodynamic characteristics of spirally wound air ducts; secondly – advantage of mounting: mounting of spirally wound air ducts is carried out easily and quickly with straight segments and sections of fittings. Due to the high quality of fittings, construction of the fittings and hermiticity, the decrease of air leak, waste of pressure and noise level is observed. The modern automated line of...

Any fitting or network equipment (silencers, throttles etc.) is a coupling element. Coupling is used only for straight segments’ joining. The fittings are connected with a female coupling. 1. Accomplish calculations of the chosen ventilation system and choose the necessary components; 2. Apply a thin (2-3 mm) stripe of sealant (silicone) on the edge of the fitting*; 3. Mount the fitting into the straight duct segment; 5. Female coupling is used for two fittings’ connection. * product with a sealing ring does not require the application of sealant VENTS. Spirally wound ducts | Catalogue...

SPIRALLY WOUND DUCTS Round duct Female coupling VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

One-sided reducer Angular T-joint VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

STRAIGHT ROUND DUCT Round duct VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

Diameter (d). Steel thickness (p). Length (L), VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

Diameter (d). Steel thickness (p). Length (L), VENTS. Spirally wound ducts | Catalogue No. 13 | 06-2014

VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

T Diameter (d). Steel thickness (p). Length (L), VENTS. Spirally wound ducts | Catalogue No. 13 | 06-2014

VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

thickne Steel thickness (р), mm VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

ONE-SIDED REDUCER One-sided reducer One-sided reducer 200/140 One-sided reducer 200/150 One-sided reducer 280/160 One-sided reducer 280/200 VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

ONE-SIDED REDUCER VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

ONE-SIDED REDUCER One-sided reducer 600/450 One-sided reducer 600/500 One-sided reducer 900/630 One-sided reducer 900/710 One-sided reducer 1250/800 One-sided reducer 1250/900 VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

T-joint 140/125 T-joint 140 T-joint 150/125 T-joint 150 VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014

ANGULAR T-JOINT Angular T-joint Angular T-joint 140/125-45 Angular T-joint 140-45 Angular T-joint 150/125-45 Angular T-joint 160/125-45 Angular T-joint 160/140-45 Angular T-joint 160/150-45 VENTS. Spirally wound ducts | Catalogue No.13 | 06-2014