MODULAR AIR HANDLING UNITS
16Pages

Modular Air Handling Units ventilation systems MODULAR AIR HANDLING UNITS VENTS reserves the rights to modify any of its products’ features, designs, components and specifications at any time and without notice to maintain the development and quality of manufactured goods. 08/2015

Industrial and commercial ventilation (Catalogue no. 1) Energy saving ventilation Air handling units (Catalogue no. 2) Industrial and commercial ventilation components - fans for round and rectangular ducts, sound-insulated, axial and roof fans, air handling units with heat recovery, air heating units, accessories. Energy saving supply and exhaust units and air handling units with heat recovery with air capacity up to 6500 m3/h. Smoke extraction and ventilation (Catalogue no. 5) Domestic ventilation (Catalogue no. 6) Smoke protection systems of buildings and premises. MOLLIER DIARGAM vapor...

Air handling units AirVENTS (Catalogue no. 3) Energy saving air handling units with air capacity up to 40 000 m3/h, for use in large residential, industrial and commercial objects. Energy saving ventilation Geothermal systems GEO VENTS (Catalogue no. 4) Energy saving system GEO VENTS with use of the earth’s surface layers heat. High ventilation system energy efficiency and low operating costs. Domestic fans (Catalogue no. 7) Domestic fans with air capacity up to 365 m3/h with extra functions: timer, humidity sensor, motion sensor, etc. Applied for premises up to 30 m2. VENTS VN Mono-pipe...

content about the company selection program casing types sections accessories control systems building management systems inquiry form mollier diagram VENTS. Modular Air Handling Units | 08-2015 VENTS. Modular Air Handling Units | 08-2015

WELCOME TO THE VENTS WORLD! VENTS company was founded in the nineties of the XXth century. Dynamic development of the enterprise and ongoing study of the consumer demand enabled rapid international leadership of the company in the ventilation industry. VENTS is a powerful research and development enterprise with 2500 professionals working as a single team to ensure a full production cycle from idea to end product. The production base of the company is located at more than 60 000 m2 area. It includes 16 workshops equipped under the latest international standards and each of them is...

VENTS AHU SELECTION PROGRAM ■ Advantages of the program: Flexible system designed to create commercial offers with a maximum accordance to the customer requirements. High flexibility allows creation of a non-standard arrangement of sections. Design optimization: unit can be arranged as a single block or in separate sections. Overall sizes of each section can be manually adjusted. UNIT DESIGNATION Size Service Acces Side Size depends on required air capacity Supply Units Exhaust Units Left side Right side Indoor mounting Indoor mounting EXH/O Outdoor mounting Heat Recovery Units Rotary Heat...

SIZE SELECTION Unit Size Recommended performance area Maximum performance area Unit size

CASING TYPES Unit casing provides thermal and sound insulation, as well as durability and protection from external influence. AirVENTS series are available in several types of casing, general properties of which are: □ High Mechanical strength. Class D1 according to EN 1886. □ Corrosion Resistance. Class C4 according to ISO 12944. □ Thermal insulation. Class T3 according to EN 1886. □ Protection from thermal bridges. Class TB3 according to EN 1886. Increased fire resistance, high quality insulation materials. Mineral wool basalt fiber insulation with 90 kg/m3 density. Unlike other types of...

■ Frameless units - high termal isolation Frameless design casing system excludes thermal brigdes, usuall for aluminum or steel frame. This significantly increases thermal resistance and reduces heat loss, especially for outdoor installation. It also prevents condensation on the surface when air cooling is on. Casing panels made of sheet steel with a layer of 40 mm thermal and acoustic insulation from mineral wool. Casing material varies depending on unit application: Outer panel surface material: □ Zinc-aluminium coating (standard) □ Galvanized steel with polymeric coating (high corrosion...

■ Fan section types: □ Plug fan with asynchronous motor (standard) □ Plug fan with electronically commutated motor (EC motor) □ Belt driven fan in spiral casing □ Fan sections are equipped with inspection window. Plug fan Plug fans are used in case of low or medium air performance and pressure. Direct driven motor and backward curved impeller ensures high performance, reliability and easy maintenance due to the absence of belt drive. The impeller is made of high-strength composite material or sheet steel with protective polymer coating. For correct fan operation, soft start, active thermal...

■ Electric heater Section consists of electric tubular heating elements (heaters) with spiral fins with heating capacity of 5 kW each. Heating elements in the required amount are set in a removable cassette frame of galvanized steel. Heaters are protected from overheating by thermal switches with automatic reset at 50 °C and with a manual reset to + 90 °C. Heaters are grouped in «triangle» scheme, three heaters in each group. Groups of heaters are then connected in parallel into 380 V power supply network. Option: Unit with built-in electric heater triac controller allows keeping the supply...

Air dampers Louver made of aluminum profile. The dampers can be mounted inside, or outside of the section. The frame around the perimeter of the damper is made of galvanized steel. Rotating mechanism - cog wheels made of polycarbonate, mounted inside the frame, protected from external environment conditions. Square rod for automatic actuator. Two rods installed if damper height is more than 1200 mm. Air tightness class 3 according to EN 1751. Option: «Northern» execution For the regions with the outside air temperature below -40°C provided an electric heater between the blades. Heater...