Lima SN
1Pages

Product name Product group Production location Lima SN V6 Lanklaar Zagerij A mix of different kinds of clay forms the basis for this facing brick. Löss, the local loam of Aeolian origin dating from the Ice Age, is the most important base material. This löss mainly consists of a silt-like fraction, suited ideally for the manufacturing of hand form bricks. By using specific sand types for surface covering, the desired colour is achieved. Colour An ivory white brick with soft shades of grey Format Moulding method Hand form DF: 214 x 20 x 65 mm Between batches the average size and color may slightly differ. Essential Characteristics Dimensional tolerances T2 Range R1 Flatness – About length NPD Flatness – About height NPD Flatness <= 2mm Curvature NPD Reaction to fire A1 Part organic material < 0,05% <= 15% m/md Water absorption NPD Water vapour permeability 5/10 Net dry density 1720 kg/m³ (D1) Gross dry density 1610 kg/m³ (D1) Thermal conductivity Lambda 50/50 <=0,55 W/m.K Thermal conductivity Lambda 90/90 0,60 W/m.K Thermal conductivity Lambda Ui 0,644 W/m.K Thermal conductivity Lambda Ue 1,27 W/m.K Active Soluble Salts S2 F2 NPD Durability against freeze thaw Zeer vorstbest./Résist. élevée au gel Dangerous substances Pore volume Storage & handling - Store packs on a clean surface and cover them - Process from multiple packs at the same time - Follow the Vandersanden processing guidelines No rights can be derived from this document Cutting Dry Cutting with power tools may generate dust. This dust may contain silica or quartz particulate which may constitute a hazard. Persons undertaking work of this nature are advised to wear dust masks (FFP3).