Catalog excerpts
Valspar® Tractor & Implement Enamel Spray No. 5339 – Series GENERAL DESCRIPTION A high-gloss, premium quality enamel designed to withstand tough wear and weathering on exterior metal or wood. DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR. VAPORS MAY CAUSE FLASH FIRE. CONTENTS UNDER PRESSURE. VAPOR HARMFUL. PRODUCT FEATURES 5339-01, 02, 03, 05, 11, 12, 20, 27, 28, 30, 31 Contains: Acetone, methyl isobutyl ketone, butyl acetate, ethyl-3-ethoxypropionate, propylene glycol monomethyl ether acetate Heavy-duty performance High gloss enamel O.E.M. color matched Resists rust Fade resistant RECOMMENDED USES Use on farm equipment and machinery, wood and metal trim, pipes, railings and storage tanks. COMPOSITION Net Weight: 12 oz (340 g) solvent based IH Red (5339-01) MF Red (5339-02) AC Orange (5339-03) New Holl Red (5339-05) Ag Yellow (5339-06) Trans Yellow (5339-07) Equipment Yellow (5339-08) New Holl Yellow (5339-09) Ag Green (5339-10) Oliver Green (5339-11) Frd Blue (5339-12) Frd Gray (5339-13) Gloss White (5339-14) IH White (5339-15) Gloss Black (5339-16) Low Gloss Black (5339-19) Ford Red (5339-20) MF Gray (5339-22) Kbota Orange (5339-24) Cub Cad Yellow (5339-25) Cub Cad Beige (5339-26) New Kbota Orange (5339-27) Huskee Red (5339-28) Huskee Gray (5339-29) Troybuilt Red (5339-30) Husqvarna Orange (5339-31) SURFACE PREPARATION AND APPLICATION USE WITH ADEQUATE VENTILATION. Clean and dry surface. Remove dirt, grease, etc. Remove gloss from shiny surfaces. Prime bare metal. Use outdoors or in a well-ventilated area when temperature is 65−90 °F. Cover nearby area to protect from spray mist. Shake well for at least 1 minute, listening for rattle of mixing ball. Shake frequently during application. Hold can 8–10 inches from surface. Move can back and forth, releasing button after each stroke. Overlap each stroke. Two (2) thin coats are recommended. Recoat within 4 hours or after 36 hours, otherwise paint may wrinkle or lift. Dry to handle in 1 hour. If spray button clogs, remove button from can and run knife edge through slit at end of spray-button stem. To prevent clogging after use, turn can upside down and press spray head for 3 seconds. DANGER! May affect the brain or nervous system causing dizziness, headache or nausea. Causes eye, skin, nose and throat irritation. Do not puncture or incinerate (burn) container. Exposure to heat or prolonged exposure to sun may cause bursting. Do not expose to heat or store at temperatures above 120 °F (49 °C). Replace cap after each use. Vapors may ignite explosively. Keep away from heat, sparks and flame. Do not smoke. Extinguish all flames and pilot lights, and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. Use only with adequate ventilation. Do not breathe dust, vapors or spray mist. Ensure fresh air entry during application and drying. To avoid breathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headache or dizziness, or if air monitoring demonstrates vapor/mist levels are above applicable limits, wear an appropriate, properly fitted respirator (NIOSH approved) during and after application. Follow respirator manufacturer’s directions for respirator use. Avoid contact with eyes, skin and clothing. NOTICE: Reports have associated repeated or prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the vapors may be harmful or fatal. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.* In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention;* for skin, wash thoroughly with soap and water. * Call poison control center, hospital emergency room, or physician immediately. KEEP OUT OF THE REACH OF CHILDREN EMERGENCY MEDICAL TELEPHONE: 1-888-345-5732 UCA 4.2s Manufacturer and Seller make no warranty, expressed or implied, other than replacement of product; the cost of labor for the application of any paint is the customer’s responsibility. For additional safety and chronic health hazard information, refer to the Material Safety Data Sheet for this product. 8725 W. Higgins Rd., Chicago, IL 60631 866.222.8714 valsparpaint.com Revised: 1/5/16 Version: 5339D The data on this sheet represent typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide. Valspar assumes no obligation or liability for use of this information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this product is the replacement of
Open the catalog to page 1All VALSPAR catalogs and technical brochures
-
Valspar®Outdoor Spray
1 Pages
-
Cover & Go? by Valspar®
2 Pages
-
Valspar ® 4000 Alkyd Enamel
2 Pages
-
VALSPAR® LATEX PORCH & FLOOR
2 Pages
-
Valspar® Brushed Suede
2 Pages
-
Valspar® Brilliant Metals
2 Pages
-
Valspar® Venetian Plaster
2 Pages
-
Valspar® Sandstone Finish
3 Pages