Valspar® Interior/Exterior All-Purpose Primer Sealer No. 617620 GENERAL DESCRIPTION PRODUCT SPECIFICATIONS Stir thoroughly. Intermix containers to ensure uniform color. Apply with a premium-quality roller, polyester brush or airless sprayer. If applying by spray, back-roll or back-brush to work product into the surface. Apply a liberal coat of product uniformly, working well into the surface. Vehicle Type: Styrene Acrylic, Poly Vinyl Acrylic Pigment Type: Titanium Dioxide Viscosity: 100–108 Krebs Units Gloss: 5–15 Units @ 60° angle Flashpoint: N/A VOC (g/L): less than 50 g/L Volume Solids: 37% Weight Solids: 43% Weight Per Gallon: 10.6 lbs./gal. Practical Coverage: Covers up to 400 sq. ft. per gallon (37 m2 per 3.78 L) depending on surface porosity. Do not thin. Recommended Film Thickness: 4.0 mil Wet 1.5 mil Dry Dry Time @ 77 °F and 50% Relative Humidity To The Touch: 30–60 minutes Recoat with latex: 2 hours Recoat with oil: 4 hours Application Temperature: 50–90 °F (10–32 °C) All-Purpose Primer Sealer is an interior/exterior fast dry, low odor, white pigmented primer/sealer. It works will all top coats and is ideal for drywall, trim, doors, cabinets, wood, interior plaster, metal and masonry. Great for blocking a variety of household stains including light water spots, graffiti, lipstick, crayon, grease, rust streaks, pencil, smoke damage, surface burns, tannin bleed and mildew stains. Interior/Exterior versatility Fast drying, recoat in as little as one hour Excellent sealing properties Blocks a variety of household and job site stains Tintable for dramatic color changes Superior Adhesion Low odor, low VOC for minimal disruption of occupied spaces Brush, roll, and spray application RECOMMENDED USES Properly prepared interior and exterior stained surfaces, including wood, drywall and masonry. Blocks stains from tannin bleed, water, crayons, ink, grease, graffiti, rust and lipstick. SHIPPING AND PACKAGING Freight Classification: Paint or paint related material. Protect from freezing Packaging: Quart (617622) – 4 per carton Gallon (617620) – 4 per carton 5 gallon pail (617623) Tinting: To assist in dramatic, wall color changes, tint with up to 4 oz. per gallon of Universal Tinting Colorants to a shade similar to desired top coat. Clean up with warm, soapy water. Airless Spray: Pressure: 2000 PSI Tip: 0.015–0.019″ Brush: Premium-quality polyester Roller: Premium-quality roller 3/8–1/2″ nap SYSTEM RECOMMENDATIONS Bare Wood: 1 Coat: Interior/Exterior All-Purpose Primer Sealer Plaster, Patching Compound, and Tape Joints: 1 Coat: Interior/Exterior All-Purpose Primer Sealer Drywall: 1 Coat: Interior/Exterior All-Purpose Primer Sealer Masonry and Brick: 1 Coat: Interior/Exterior All-Purpose Primer Sealer Ceiling Tiles: 1 Coat: Interior/Exterior All-Purpose Primer Sealer Previously Painted Surfaces: 1 Coat: Interior/Exterior All-Purpose Primer Sealer REGULATORY COMPLIANCE Current as of: 10/22/2014 SCAQMD CARB 2000 SCM CARB 2007 SCM OTC/LADCO US National CLEANUP AND DISPOSAL Clean up with warm, soapy water. Do not freeze. Keep container closed when not in use. Do not transfer contents to other containers for storage or disposal. In case of spills, absorb with inert material such as sand or kitty litter. Dispose of empty container or unused portion in accordance with local, state and federal regulations. COMPOSITION Base and Fill Levels (oz./gal.) High Hiding Tintable White 128 The data on this sheet represent typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide. Valspar assumes no obligation or liability for use of this information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this product is the replacement of the defective product, or a ref

Valspar® Interior/Exterior All-Purpose Primer Sealer No. 617620 SURFACE PREPARATION LEAD WARNING General: Read the Lead Warning paragraph. Thoroughly clean the surface and allow to dry. Remove all surface dirt, chalk and mildew. WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how...