Valspar® Duramax® Exterior Latex Flat Paint - 2 Pages

Add to MyArchiExpo favorites
Valspar® Duramax® Exterior Latex Flat Paint

Catalog excerpts

Valspar® Duramax® Exterior Latex Flat Paint No. 73754 Series GENERAL DESCRIPTION PRODUCT SPECIFICATIONS Stir thoroughly and intermix multiple containers. Apply only when paint, surface and air temperatures are 35–90 °F (2–32 °C) during application and drying time. Do not paint if temperatures are expected to be below 35 °F (2 °C) within 48 hours of application or when heavy dew or precipitation is expected in the next 12 hours. These recommendations are a starting point only. Due to variability in sprayers, we recommend testing your spray pattern and flow before proceeding. Always paint back into freshly painted areas and end up at a door, window or outer edge. Move windows after 1 hour to prevent sticking. Clean up with warm, soapy water. Vehicle Type: Acrylic resin Pigment Type: Titanium dioxide Viscosity: 96–104 Krebs Units Sheen: 0–7 Units 85° angle Flashpoint: N/A VOC (g/L): less than 50 g/L VOC (lbs./gal.): 0.42 lbs./gal. Volume Solids: 40% Weight Solids: 58% Weight Per Gallon: 11.97 lbs./gal. Practical Coverage: Covers approximately 300– 400 sq. ft. per gallon (27–37 m2 per 3.78 L) depending on surface porosity. Do not thin Recommended Film Thickness: 4.5 mil Wet 1.8 mil Dry Dry Time @ 77 °F and 50% Relative Humidity To The Touch: 1 hour Recoat: 4 hours Dry time @ 35–45 °F (2–7 °C): Dry to touch: 2 hours Recoat: 24 hours Application Temperature: 35–90 °F (2–32 °C) Storage Temperature: 35–90 °F (2–32 °C) combines Paint + Primer with Ti3 Crosslinking Technology™ which creates an impervious bond to the surface, bridging hairline cracks and imperfections for exceptional coverage and durability. Now with our revolutionary HydroChroma™ Technology Color stays true longer™. PRODUCT FEATURES Exceptional coverage and durability Paint + Primer With Ti3 Crosslinking Technology™ Ultimate hide Fade resistant Gives mold-, mildew-, and algae-resistant coating Flexible, won’t crack or peel Early resistance to moisture and dew Application temperature as low as 350F Low odor, low VOC 100% acrylic latex Lifetime warranty RECOMMENDED USES Properly prepared, exterior wood and metal siding and trim Wood Siding & Trim Hardboard Siding; Fiber Cement Board Primed Metal Shakes; Asbestos Shingles Brick; Cement; Cinder Block Stucco; Concrete; Stone Aluminum & Vinyl Siding Do not use on glazed brick, floors or steps SHIPPING AND PACKAGING Freight Classification: Paint or paint related material. Protect from freezing. Packaging: Gallon – 4 per carton 5 gallon pail COMPOSITION White Tint Base 1 (74233) Tint Base 2 (74285) Tint Base 4 (75206) Base and Fill Levels (oz./gal.) 128 126 124 116 Airless Spray: Pressure: 2000 PSI Tip: 0.017–0.021” Brush: premium-quality polyester brush Roller: premium quality polyester 3/8–1/2” nap SYSTEM RECOMMENDATIONS New Wood: Self-priming 2 Coats: Duramax Exterior Latex Flat Paint Previously Painted Surfaces: Self-priming 1–2 Coats: Duramax Exterior Latex Flat Paint Hardboard Siding: Self-priming 1–2 Coats: Duramax Exterior Latex Flat Paint Masonry, Concrete, Stucco, and Block: Self-priming 1–2 Coats: Duramax Exterior Latex Flat Paint Metal: 1 Coat: Valspar® Armor Anti-Rust Primer or Valspar® Armor Galvanized Metal Primer 1–2 Coats: Duramax Exterior Latex Flat Paint Aluminum and Vinyl Siding: Self-priming 1–2 Coats: Duramax Exterior Latex Flat Paint CERTIFICATIONS Current as of: 4/23/2014 MPI # MPI GPS 1 MPI GPS 2 LEED (US) LEED (Canada) REGULATORY COMPLIANCE Current as of: 4/23/2014 SCAQMD CARB 2000 SCM CARB 2007 SCM OTC/LADCO US National STORAGE AND DISPOSAL Do not freeze. Keep container closed when not in use. Do not transfer contents to other containers for storage or disposal. In case of spillage, absorb with inert material such as sand or kitty litter. Dispose of contaminated absorbent, container and/or unused contents in accordance with local, state and federal regulations. The data on this sheet represent typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide. Valspar assumes no obligation or liability for use of this information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this product is the replacement of the defective product, or a refund of its purchase price, at our option.

 Open the catalog to page 1

Valspar® Duramax® Exterior Latex Flat Paint No. 73754 Series SURFACE PREPARATION LEAD WARNING General: Read the Lead Warning paragraph. Thoroughly clean the surface and allow to dry. Remove all dirt, dust, chalk, rust, grease, wax and mildew. Patch all cracks with appropriate patching compound. Remove any powdery dust and efflorescence. This product may be used to prime most new or bare surfaces. WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT...

 Open the catalog to page 2

All VALSPAR catalogs and technical brochures