Signature ® Colors Brushed Pearl Product Description Impart a dimensional iridescent finish to walls with Valspar Signature Colors Brushed Pearl Glaze. This faux finish is subtle, incorporating gentle tones for a muted effect. It’s simple to apply and will add elegance and sophistication to any room. Typical Properties (272424) Vehicle Type: Acrylic Polymer Sheen: 10–20 Units @ 60° angle Solids by Volume: N/A Solids by Weight: N/A Weight per Gallon: 11.0 lbs./gal. Features • Dimensional Iridescent Finish VOC: Less than 350 g/L Viscosity: Thick Paste Dry Time: 77°F @ 50% Relative Humidity To the touch: 1-3 hours Recoat: 4 hours Washing: Allow at least 7 days before washing. Use mild detergent and sponge. Recommended Uses • Walls • Ceilings Colors and Base Information Brushed Pearl Surface Coverage: 100–200 sq. ft./gal. At: 4.0 mil Wet Storage and Disposal • Do not freeze. • Keep container closed when not in use. • Do not transfer contents to other containers for storage or disposal. • In case of spillage, absorb with inert material such as sand or kitty litter. • Dispose of contaminated absorbent, container and/or unused contents in accordance with local, state and federal regulations. Packaging: Gallon – 4 per carton Freight Classification: Paint or Paint Related Material. Protect from freezing.

Surface Preparation Read the Lead Warning in Cautions section. Surface should be clean and dry. Scrape off loose paint and patch all holes, cracks and indentations. Any imperfections and wall seams will be more visually apparent with a metallic paint. Application and Clean-up Paint only when surface and air temperatures are 50–90 °F (10–32 ºC). Apply a base coat of Valspar® Signature Colors® Interior Satin Wall and Trim Paint in a color similar to your chosen Brushed Pearl Glaze. Allow to dry completely. Use color wash brush to apply Brushed Pearl, cut in along ceiling, floor and molding of a...