Valspar® Anti-Rust Armor Spray Primer
2Pages

{{requestButtons}}

Catalog excerpts

Valspar® Anti-Rust Armor Spray Primer - 1

Armor Anti-Rust Enamel Spray Primer Typical Properties (21900 Series) Product Description Use primer to increase adhesion, give added protection against rust and improve final topcoat appearance. Gives superior adhesion for top coat Improves overall finish Helps prevent corrosion Interior/Exterior use Dry Time: To the touch: 30-50 minute(s) Recoat: Within 4 hour(s) or after 36 hour(s) Surface Coverage: Coverage varies depending on surface color and porosity. Colors and Part Numbers Red Oxide Gray White Recommended Uses • • • • • • Appliances Playground equipment Piping Wrought iron railings Mailboxes Tanks Can Size and Fill Weight Can Size: 16 oz. Fill Weight: 12 oz.

Open the catalog to page 1
Valspar® Anti-Rust Armor Spray Primer - 2

Application Instructions USE WITH ADEQUATE VENTILATION 1. Surface should be clean and dry. Remove dirt, grease, loose particles, wax, etc. Bare metal should be primed. 2. Use outdoors or in well-ventilated area when temperature is between 65–90 °F (18–32 °C) and humidity is below 60% to ensure proper drying. 3. Mask surrounding area on which spray may settle with newspapers or drop cloths. 4. Shake well, listening for rattle of mixing ball. Continue shaking for at least one minute. Shake for 10 seconds at 1-2 minute intervals during application. 5. Hold can 12-16 inches from surface. Press...

Open the catalog to page 2

All VALSPAR catalogs and technical brochures