Barn & Fence acrylic Latex Paint
1Pages

PRODUCT INFORMATION Barn & Fence Acrylic Latex Paint This product is a durable water-based farm finish for barns, fences and Ideal for exterior surfaces including wood, masonry, primed metal, weathered steel and aluminum siding. 1191 Wheeling Road, Wheeling, IL 60090 SURFACE PREPARATION: General: Surface must be clean, dry and in sound condition. Remove all foreign materials such as dirt, dust, mildew and peeling paint. New/Unpainted Surface: New, bare and badly weathered wood should be primed with this product thinned at a rate of 8 fl. oz. of water per gallon of paint. New or bare metal should have all surface rust removed and then prime with an appropriate metal primer. Previously Painted Surfaces: Scrape off loose and peeling paint, sand, then prime. Dull glossy surfaces with a gloss remover or Hardboard Siding (unprimed, primed or previously painted): Remove any wax from bleed through areas by wiping with mineral spirits soaked rags, turning often to avoid merely spreading wax around. Prime all hardboard with an exterior oil-based primer. Masonry: Wire brush loose material from chalking areas on concrete, brick and concrete Metal: Remove rust on galvanized surfaces and spot prime with a rust inhibitive metal Clean Mildew from the Surface: Mildew is a fungus that looks like dirt, but detergent will not wash it off. Scrub the surface before painting with a commercial mildew remover or 1 part liquid chlorine bleach to 3 parts water. Wear protective clothing and avoid skin or eye contact when working with bleach solution. Rinse the surface thoroughly and TYPICAL PRODUCT PROPERTIES: VEHICLE TYPE: Covers approximately 400 sq.ft. (37.2m2) per gallon on smooth surfaces, less on rough or porous surfaces. Thinning is not recommended, except as noted above. Apply only when surface and air temperatures hour, longer in cool temperatures or humid conditions. Wait 4 hours before recoating.