VALPAINT S.p.A. Via dell’Industria, 80 - 60020 POLVERIGI (AN) ITALY Tel. +39 071 906383 (r.a.) - Fax +39 071 906384 C.F./P.IVA/ R.I. di AN 01108220425 Capitale Sociale € 500.000,00 i.v. www.valpaint.it E-mail: [email protected] VALSETIN Technical Sheet NAME: TYPE: USE CARACHTERISTICS: VALSETIN Paint for indoor with silk and luminous effects water-based interior coating. 1.086 + 30 gr/LT. at 25°C specific weight: === viscosity: 8 - 9 m²/LT. with Silk Effect using Spatula (it may yield: vary according to the roughness, porosity and surface absorption and to the method of application ) gloss with silk effect as per catalogue – colours achievable using COLORI’ LT. 1 - LT. 4 packaging: 2 hours at 20°C on surface: 2 - 4 hours at 20°C over-painting: 18 - 24 hours at 20°C in depth: VALSETIN customises rooms and gives them a distinctive look: every decorative effect comes to life in a spellbinding array of elegant colours. Precious silk effects and tasteful colours are harmoniously combined in VALSETIN, an elegant and stylish water-based paint for indoor application. VALSETIN can be used to create unique and refined environments in line with new decorative trends, regardless of whether the overall style is modern or classic.To create the colours displayed in the catalogue, mix VALSETIN with the corresponding quantity of COLORI’ colouring paste. Alternatively, the VALCLONE paint-mixing system may be used to achieve the desired colour. V30 can be added to any colour of VALSETIN to achieve the very best effects using the product, letting its silky shine emerge to create a captivating visual and tactile sensation and making it possible to create all the Effects listed below, but in the SOFT version Remove old non-adhering and peeling paint and wash using a suitable soap product. When the surface is dry, fill any cracks. Once the filler has dried, sand the surface to make sure it is smooth. Next, apply a coat of PRIMER 400 diluted 50% with water to act as a fixative. After approximately 4 - 6 hours at 20°C, smooth over a second coat of undiluted PRIMER 400. PRIMER 400 should be applied with a Wool Roller, using as many criss-crossed strokes as possible in order to achieve optimal surface coverage. If, on the other hand, the surface is clean, smooth, intact or new, only sand where necessary to ensure it is perfectly smooth. Next, apply undiluted PRIMER 400 to the filled areas only; after 4 - 6 hours at 20°C smooth PRIMER 400 over the entire surface using a Wool Roller, with as many criss-crossed strokes as possible so as to achieve optimal surface coverage. After 4 hours at 20°C, proceed with the application of VALSETIN.N.B: The PRIMER 400 should be coloured before application, in accordance with the selected VALSETIN colour. page 1 of 3 aesthetic effect: colours: VALPAINT ESPAÑA S.L. 08840 VILADECANS - ESPANA Tel. +34 93 6382645 Fax +34 93 6382735 E-mail: [email protected] VALPAINT DESIGN D.O.O. Dzemala Bjedica, 281 71000 SARAJEVO - BiH Tel. +387 33 626134 Fax +387 33 761115 E-mail: [email protected] VALPAINT DECORATION D.O.O. 21000 NOVI SAD - SRBIJA Tel. +381 21 552366 Fax +381 63 8160320 E-mail: [email protected] VALPAINT TUNISIE S.A. 1100 ZAGHOUAN - TUNISIE Tel. +216 72 681051 Fax +216 72 681071 E-mail: [email protected] VALPAINT DECOR (INDIA) PVT LTD 400705 MIDC NERUL NAVI MUMBAI - INDIA Tel. +91 22 27613368 Fax +91 22 27613367 E-mail: [email protected]

VALPAINT S.p.A. Via dell’Industria, 80 - 60020 POLVERIGI (AN) ITALY Tel. +39 071 906383 (r.a.) - Fax +39 071 906384 C.F./P.IVA/ R.I. di AN 01108220425 Capitale Sociale € 500.000,00 i.v. www.valpaint.it E-mail: [email protected] SC 00178 PREPARATION OF THE PRODUCT: APPLICATION: system: number of coatings: by brush, by spatula , by pad and spray. 2 or more APPLICATION CYCLE: Silk Effect using a Spatula: Smooth over a thin (0,1 - 0,15 mm) layer of VALSETIN using the PV 43 Stainless Steel Trowel or the PV 77 Plastic Spatula. After covering an area of approximately 1 square metre, go over the applied...

VALPAINT S.p.A. Via dell’Industria, 80 - 60020 POLVERIGI (AN) ITALY Tel. +39 071 906383 (r.a.) - Fax +39 071 906384 C.F./P.IVA/ R.I. di AN 01108220425 Capitale Sociale € 500.000,00 i.v. www.valpaint.it E-mail: [email protected] SC 00178 SETOMAT to 4 l of VALSETIN. Apply the mixture of VALSETIN + SETOMAT to a smooth plastic or wood surface (approximately 25 X 25 cm) using a Brush or a Roller. Dip the PV 32 Sponge into the VALSETIN + SETOMAT mixture deposited on the plastic surface, then use it to apply the mixture to the area. Wallpaper Silk Effect: Carry out the same preparation work as described...