Via dell'lndustria, 80-60020 POLVERIGI (AN) ITALY E-mail: [email protected] Technical Sheet TECHNICAL DATA water-base transpiring primer for interior and exterior white high-covering professional water-based paint. It is a special primer created to get ancient effects of Arteco' 1 and Arteco'3 specific weight: roughness, porosity and surface absorption and white (it is possible to colour it using Additival or other colorants for water-base systems It well resists to rural and marine atmosphere It does not prevent wall transpiration. It is suitable also for wet places (bathrooms, kitchens) and to paint ceilings, where the excellent paint film impermeability avoids paint stripping off. Take away the old paint not properly stuck on the surface, and stucco the surface, where necessary, with VALSTUC. After 4 hours at 20°C once the stucco gets well dried, sand carefully the surface, then apply a coating of PRIMART 500 Proceed with Arteco' 1 or 3 application thinning: 15 - 20% with drinkable water on the catalization relation: - Drums and working tools must be carefully and immediately washed after their use. - Application temperature should not be inferior to + 5°C. Do not apply on surfaces exposed directly to the sun and to the wind in order to prevent paint stripping off. Technical Sheet n° SC 00145 issued by the Control Quality Department