Via dell'Industria, 80 ■ 60020 POLVERIGI (AN) ITALY E-mail: [email protected] www.valpaint.it * www.valpaintjungle.it Technical Scheet MAGIC LIGHT FINITURA K 100 APPLICATION CYCLE: MAGIC LIGHT FINITURA K 100 Water -based luminescent finish To be added to decorative paints, transparent waterbased resins, breathble and washable finishes. specific weight: aesthetic effect: 6-7 m2/LT one coating on smooth surfaces (it may vary according to the roughness, porosity and surface absorption and to the method of transparent water-based paint for indoor use that absorbs both natural and artificial light before returning it in complete darkness. This is precisely why, by lighting a room decorated with MAGIC LIGHT for 5 minutes, when the lights is then switched off, the treated walls will gradually light up again before stabilizing a few minutes later. Luminescence may last from 6 to 8 hours, depending on the quantity of light absorbed and the intensity of the darkness, reducing gradually over this time. MAGIC LIGHT Finish K100 remains matt and breathable but above all transparent, without altering the underlying colour or effect, particularly on light colours; dark colours may be altered slightly. Therefore, the lighter the colour of the support, the more MAGIC LIGHT Finish K100 will light up in the dark. The illuminating power of MAGIC LIGHT can be strengthened by using Wood-type lamps (neon or purple lamp), to be switched on intermittently for 2 - 3 minutes every 3 - 4 hours. Always apply one coat of undiluted Finish V 16 using a brush or roller. After approximately 12 hours at 20°C, apply MAGIC LIGHT Finish K100 thinning: ready to use - mix well system: roller-pad number coating: 1 or more Magic Light Finish K 100 can be applied on new and old paints, smooth or rough surfaces but well adhering and not peeling using Roller PV 31 and pad till the product is still wet using Pad PV 33 or Roller PV 30 Storage: make sure the tin is tightly closed, even after use, and store at a Shelf life: approximately 1 year, if well sealed and never opened Mix well before using with a wooden stick or metallic one E-mail: [email protected] E-mail: [email protected] Zone Industrielle Zaqhouan E-mail: [email protected]

Via dell'Industria, 80 ■ 60020 POLVERIGI (AN) ITALY E-mail: [email protected] www.valpaint.it * www.valpaintjungle.it Application temperature must be not inferior to +5°C and superior to +30°C. Wash the tools soon after use with Technical sheet n° SC 00245 issued by the Control Quality Manager: E-mail: [email protected] E-mail: [email protected] Zone Industrielle Zaqhouan E-mail: [email protected]