Via dell'lndustria, 80 ■ 60020 POLVERIGI (AN) ITALY E-mail: [email protected] www.valpaint.it • www.valpaintjungle.it Technical Sheet paints with antique metallic effects water-based interior coating specific weight: aesthetic effect: roughness, surface absorption and application colours from the catalogue it is a typically modern and elegant water-based paint for indoor use. KLONDIKE can be applied to a wide range of surfaces; thanks to its unique colours and shades, it may be used to create extremely on-trend living environments. The decorated surfaces capture the precious forged metal fragments incorporated in the paint, enhancing its gold, silver and oxidised effects. This achieves the perfect result: rooms are framed by metallic walls and become truly contemporary spaces. KLONDIKE is a high-quality product as it is breathable, washable and may also be painted over with any other water-based pain Old walls. Remove old non-adhering and peeling paint and wash using water and a suitable soap product. Next, apply a fixative suited to the type of surface. When the fixative is completely dry, apply a coat of PRIMER 900 and, after 6 hours at 20°C, proceed with the application of New walls. Clean (and if necessary, fill) the surface you wish to paint. Once it is dry, sand the surface and apply a coat of suitable fixative. When the fixative is completely dry, apply a coat of PRIMER 900 and, after 6 hours at 20°C, proceed with the application of KLONDIKE. Wood, glass, light alloys and painted iron. Remove all grease from the surface and sand well, so that it is smooth and clean. Apply a coat of primer which is suited to that particular type of surface, then apply a coat of PRIMER 900. After 6 hours at 20°C, proceed with the application of KLONDIKE. New iron (not treated). Remove all grease and any layers of rust from the surface and apply one coat (or more) of a suitable anti-rust treatment. When this is completely dry, apply a coat of PRIMER 900 and, after 6 hours at 20°C, proceed with the application of KLONDIKE. E-mail: [email protected] E-mail: [email protected] Zone Industrielle Zaghouan E-mail: [email protected]

- www.valpaint.it • www.valpaintjungle.it - APPLICATION CYCLE: To create the colours displayed in the catalogue, carefully mix KLONDIKE with the exact quantity of COLORI' colouring paste required: 15 ml for 2.5 litres of KLONDIKE, or 6 ml for 1 litre of KLONDIKE. Alternatively, the VALCONE paint-mixing system may be used to achieve the desired colour. To create the Gold or Silver effects, you will have to add GOLD ADDITIVE G 100 or SILVER ADDITIVE G 200 to the coloured KLONDIKE product, in the following quantities: 250 ml for 2.5 litres of KLONDIKE, or 100 ml for 1 litre of KLONDIKE. 1) Classic...