OCL X Mast
41Pages

Overhead Contact Line support masts

Overhead Contact Line support masts © 2018. Patents & Models registered by Valmont France.

Summary X Profile for OCL masts Mixed masts OCL X mixed with lighting OCL XL round Flower engraved OCL XXL round Flower engraved Valmont France A team / vision & strategy OCL XL round axial perforated OCL XXL round Flower light Sustainable development OCL XXL round Traffic light

The X profile for OCL masts The new technical and aesthetical solution The place of the tramway is expanding in the cities. The success of a tram line results from a complex equilibrium, linked to its socio-economic stakes, its accessibility, the mobility of inhabitants, the quality of its urban integration and the reflection between cgeneral contractor and construction managers. A tram line also «promotes associated» elements of architecture and design essential to its proper functioning, such as stations and furniture to ensure the comfort and safety of users. Among these emergences, the...

Sizing according to the requisite effort Table of sections and standards of effort The OCL-X masts are defined in 2 standard heights : 8m50 / 10m50 et 5 classes d’efforts. They are dimensioned according to standard NF C 11-201/A1. The top deflection of the mast is limited to 1.5% under the service load conditions without wind. The conical cross masts are composed of a main core and 2 legs. The resulting effort must be applied in the main axis of the mast. (An angle of 30 ° maximum is allowed) base width top width core width legs width effort Direction

Variations of the mast the most refined to the most expressive one On the basis of the core X profile perfectly adapted to common sections of tram lines, round and square claddings are available in aluminum sheet, on the lower part up to 3 meters, and in the upper part up to 6 meters. These options offer a wide expressive potential that resonates with the identity of the places crossed. In this catalog, we offer various technical solutions and claddings that can be enriched and personalized by the owners and the project management. X profile without cladding for common sections XL Lower...

OCL X basic lateral X profile without cladding for common sections STRUCTURE - X Steel S355. Machine-Welded conical structure. Stainless steel connecting piece between the X profile and the arm. Surface Preparation: Steel grit Blasting SA2.5. Bi-Component Epoxy Primer. Polyurethane finish Bi-components. Durability 12-15 years in C3 exterior.

OCL X basic axial X profile without cladding for common sections STRUCTURE - X Steel S355. Machine-Welded conical structure. Stainless steel connecting piece between the X profile and the arm. Surface Preparation: Steel grit Blasting SA2.5. Bi-Component Epoxy Primer. Polyurethane finish Bi-components. Durability 12-15 years in C3 exterior.

cladding perforations

OCL XLround perforated Lower section cladded with the aluminium round perforated sheet accessory & lighted beacon STRUCTURE - X Steel S355. Machine-Welded conical structure. Stainless steel connecting piece between the X profile and the arm. Surface Preparation: Steel grit Blasting SA2.5. Bi-Component Epoxy Primer. Polyurethane finish Bi-components. Durability 12-15 years in C3 exterior. CLADDING Lower perforated round-conical cladding in aluminium, thickness 3mm with powder coating finish. Inspection door equipped with anti-theft magnetic lock, clipped on the structure without visible...

OCL XLround axial perforated Lower section cladded with the aluminium round perforated sheet accessory & lighted beacon STRUCTURE - X Steel S355. Machine-Welded conical structure. Stainless steel connecting piece between the X profile and the arm. Surface Preparation: Steel grit Blasting SA2.5. Bi-Component Epoxy Primer. Polyurethane finish Bi-components. Durability 12-15 years in C3 exterior. CLADDING Lower perforated round-conical cladding in aluminium, thickness 3mm with powder coating finish. Inspection door equipped with anti-theft magnetic lock, clipped on the structure without...

OCL XXLround perforated Upper and lower sections cladded with the aluminium round perforated sheet accessory & lighted beacon. STRUCTURE - X Steel S355. Machine-Welded conical structure. Stainless steel connecting piece between the X profile and the arm. Surface Preparation: Steel grit Blasting SA2.5. Bi-Component Epoxy Primer. Polyurethane finish Bi-components. Durability 12-15 years in C3 exterior. CLADDING Upper and lower perforated round-conical cladding in aluminium, thickness 3mm with powder coating finish. Inspection door equipped with anti-theft magnetic lock, clipped on the...

OCL XLsquare perforated Aluminium square perforated sheet accessory on the lower part & lighted beacon STRUCTURE - X Steel S355. Machine-Welded conical structure. Stainless steel connecting piece between the X profile and the arm. Surface Preparation: Steel grit Blasting SA2.5. Bi-Component Epoxy Primer. Polyurethane finish Bi-components. Durability 12-15 years in C3 exterior. CLADDING Lower perforated square-conical cladding in aluminium, thickness 3mm with powder coating finish. Inspection door equipped with anti-theft magnetic lock, clipped on the structure without visible screws. RGBW...

OCL XXLsquare perforated Aluminium square perforated sheet accessory on the upper and lower parts & lighted beacon STRUCTURE - X Steel S355. Machine-Welded conical structure. Stainless steel connecting piece between the X profile and the arm. Surface Preparation: Steel grit Blasting SA2.5. Bi-Component Epoxy Primer. Polyurethane finish Bi-components. Durability 12-15 years in C3 exterior. CLADDING Upper and lower perforated square-conical cladding in aluminium,, thickness 3mm with powder coating finish. Inspection door equipped with anti-theft magnetic lock, clipped on the structure without...

OCL XLround Flower engraved Aluminium round-conical accessory, with Flower pattern engraving on the lower part & lighted beacon STRUCTURE - X Steel S355. Machine-Welded conical structure. Stainless steel connecting piece between the X profile and the arm. Surface Preparation: Steel grit Blasting SA2.5. Bi-Component Epoxy Primer. Polyurethane finish Bi-components. Durability 12-15 years in C3 exterior. CLADDING Lower engraved round-conical cladding in aluminium,, thickness 3mm with powder coating finish. Inspection door equipped with anti-theft magnetic lock, clipped on the structure without...