muller van severen The colorful aluminum collection was designed with special attention to different ways of colouring and treating the surfaces. The designers-duo uses different laquer finishes from glossy candy colors to textured ral colors to hammer blow finishing paint. You often see this paint applied on mechanical equipment or machines. It’s textured (as if hammered ) and therefore ideal to cover up bumps in metal. It’s UV-resistant and water-repellent so all these pieces can be used outside.

colour combinations — alu chair aluminium tube back in aluminum sheet chair frame: manually grinded powdercoated with transparent varnish protective laquer fourtheen color uv-protective laquer laquer vary from metallic candy colors to textured

alu collection by muller van severen stackable chair stackable chair — for indoor and outdoor use material: 100% aluminium – chairframe in square aluminium tube 20x20mm - seat and back in aluminum sheet 3mm two options for the chair frame : 1— aluminium, powdercoated with a blue hammer paint uvprotective laquer. 2— painted aluminium, powdercoated with a green textured uvprotective laquer three color combinations for seat and back: all powdercoated with a textured uv-protective laquer according ralcolors. Stackability: 6 chairs / a stacking trolley for more chairs is in development. colour combinations...

alu collection by muller van severen round table S — for indoor and outdoor use Material: 100% aluminium – tabletop in aluminium sheet 15mm outer column in extruded aluminum tube 76mm – tablefoot in aluminium sheet 15mm three different options: 1— painted aluminium, powdercoated with a blue hammer paint uvprotective laquer. 2— painted aluminium, powdercoated with a green hammer paint uvprotective laquer. 3— manually grinded surface showing the beauty of aluminium , protected with beeswax (this natural protection needs to be done regularly to be outdoor protected) glides in polyethelene or felt...

alu collection by muller van severen alu square — for indoor and outdoor use Material: 100% aluminium – aluminium sheet 3mm Alu square is assembled out of 3 aluminium panels: one top and two legs. Each panel has three finishes: 1— painted aluminium, powdercoated with a blue hammer paint uvprotective laquer. 2— painted aluminium, powdercoated with a green hammer paint uvprotective laquer. 3— industrial grinded showing the beauty of linear grinded aluminium, protected with beeswax Due to the 3 different finishes of each panel, you have 3 different options for the assembled alu squares colour combinations...

alu collection by muller van severen care instructions Stain removal: For quick removal of contaminants on aluminium surfaces, apply a glass cleaner with a clean, soft cloth and subsequently wipe the surface dry with a soft cloth. Powder-coated surfaces should be cleaned with aqueous solutions made from pH-neutral (pH 5-8) detergents or cleaning products and soft, non-abrasive cloths, rags or industrial cotton batting. Always clean metal surfaces gently and without scrubbing so that the surface is not scratched. Never use cleaners containing granular substances, acetic acid or citric acid.