Catalogs >
USG >
USG SHEETROCK® BRAND INTERIOR FINISHING

USG SHEETROCK® BRAND INTERIOR FINISHING
23Pages

Catalog excerpts

AN UNRIVALED FINISH. EVERY TIME. USG SHEETROCK® BRAND INTERIOR FINISHING PRODUCTS usg.com

At USG, we know that settling for “good enough” is never an option. You need reliable, high-quality products that you can depend on every time. For more than 100 years, USG has been the leading manufacturer of the highest-performing building materials within the industry. So you can trust that when you choose our products, you’re always getting the best possible quality. We offer finishing products specifically designed to meet your needs, and a full portfolio that provides unique and adaptable solutions for a variety of environments. Beyond outstanding products, we also offer expertise,...

Open the catalog to page 2

JACKSONVILLE, FL GALENA PARK, TX Whether you prefer a lightweight, conventional weight, or airborne dust reducing joint compound, USG has a solution specifically formulated to meet your needs – wherever you are. For more than 100 years, our customers have relied on USG to develop and deliver high-performing products. With nearly 200 years of combined formulation experience – and a manufacturing network that spans the country – USG Sheetrock® Brand Joint Compounds provide you with the largest portfolio in the industry, all backed by nationwide distribution. Auburn, WA Baltimore, MD...

Open the catalog to page 3

JOINT COMPOUNDS READY-MIX JOINT COMPOUNDS USG ready-mixed joint compounds are preferred for consistently high-quality work. Superior formulations are premixed to a creamy, smooth consistency and are essentially free of crater-causing air bubbles. USG ready-mixed joint compounds can be used in hand or machine-tool applications and offer excellent slip, bond, and easy workability. Most USG joint compound products are GREENGUARD GOLD certified. Please review product data available at usg.com or usg.ecomedes.com for product specific compliance. CONVENTIONAL WEIGHT USG SHEETROCK® BRAND ALL...

Open the catalog to page 4

CONVENTIONAL WEIGHT CONT. USG BEADEX® BRAND ALL PURPOSE JOINT COMPOUND PRODUCT DATA • Combines single-package convenience with good taping and topping performance REGIONAL AVAILABILITY: • Ideal for embedding and finishing, hand-applied simple texturing, skim coating, laminating and repairing cracks in interior plaster and masonry not subject to moisture Auburn 4.5 gal. pail, 3.5 gal. carton USG SHEETROCK® BRAND PLUS 3® JOINT COMPOUND PRODUCT DATA • Weighs up to 25% less than conventional-weight compounds • eatures good open time and less shrinkage F 3.5 qt. pail, 4.5 gal. pail, 3.5 gal....

Open the catalog to page 5

LIGHTWEIGHT CONT. USG BEADEX® BRAND GOLD™ LITE JOINT COMPOUND • eighs up to 30% less than conventional-weight compounds W • acilitates working back, even under fast-drying conditions, by F providing more wet-edge life to prevent rolling and tearing of previously laid compound PRODUCT DATA REGIONAL AVAILABILITY: • actory-controlled shrinkage results in finer finished work, but F without the extra labor USG SHEETROCK® BRAND ULTRALIGHTWEIGHT JOINT COMPOUND • Weighs up to 40% less than conventional-weight compounds • Superior formulation provides enhanced working properties and improved slip...

Open the catalog to page 6

SETTING-TYPE JOINT COMPOUNDS USG setting-type joint compounds provide faster finishing of drywall interiors, even under slow drying conditions. Rapid chemical hardening and low shrinkage permit same-day finishing and usually next-day decoration. These products feature exceptional bond; virtually unaffected by humidity extremes. They are ideal for laminating double-layer systems, particularly fire-rated assemblies, and for adhering gypsum panels to above-grade concrete surfaces. May also be used for surface texturing and for filling, smoothing and finishing interior above-grade concrete....

Open the catalog to page 7

FIBERGLASS JOINT TAPES USG Sheetrock® Brand Fiberglass Joint Tape is made with a unique cross-fiber construction to provide greater drywall joint strength than conventional fiberglass leno-weave mesh tapes. This self-adhesive tape goes on quickly, eliminating the bedding coat. Finished joints are accomplished in two coats by using setting-type joint compound. It is not recommended to use drying-type compounds with fiberglass tape. USG SHEETROCK® BRAND FIBERGLASS JOINT TAPE PRODUCT DATA • Self-adhesive tape—no bedding coat needed • Smooth joints in only two coats 75' roll, 250' roll; 1-7/8"...

Open the catalog to page 8

90° AND OFFSET OUTSIDE CORNER BEAD CONT. 90° AND OFFSET INSIDE CORNER USG SHEETROCK® BRAND PAPER-FACED METAL CORNER BEAD OFFSET OUTSIDE, CORNER, TAPE-ON (B1 OS) USG SHEETROCK® BRAND PAPER-FACED METAL CORNER TRIM INSIDE CORNER, TAPEON (B2) Designed to form a true inside (90°) corner. For use with any thickness of wallboard. Standard lengths: 8', 9', 10'. Meets ASTM C1047. ALSO AVAILABLE IN USG BEADEX® BRAND Designed for 135° corners. Offset bead is designed to give a true offset corner with a smaller bead height requiring less compound to finish. Can be used on any thickness of wallboard....

Open the catalog to page 9

SOFTLINE BULLNOSE AND OFFSET OUTSIDE CORNER BEAD CONT. SOFTLINE BULLNOSE AND OFFSET OUTSIDE CORNER BEAD CONT. USG SHEETROCK® BRAND PAPER-FACED METAL CORNER BEAD 1" BULLNOSE OFFSET OUTSIDE CORNER, TAPE-ON (SLOC OS) USG SHEETROCK® BRAND PAPER-FACED METAL CORNER BEAD 3/4" BULLNOSE OUTSIDE CORNER, NAIL-ON (SLOC N) Use for smooth, rounded corners where nailing or other mechanical fastening is required. Can be fastened to 1/2" or 5/8" drywall with nails, staples or screws. Standard lengths: 8', 9', 10'. Meets ASTM C1047. ALSO AVAILABLE IN USG BEADEX® BRAND Installs easily to form a smooth rounded...

Open the catalog to page 10

SOFTLINE BULLNOSE AND OFFSET OUTSIDE CORNER BEAD CONT. USG BEADEX® BRAND PAPERFACED METAL CORNER BEAD 1" BULLNOSE OFFSET OUTSIDE CORNER, NAIL-ON (SLOC NOS) USG SHEETROCK® BRAND PAPER-FACED METAL TRIM “L” SHAPED, TAPE-ON (B4 SERIES) Use where wallboard abuts with suspended ceilings, beams, plaster, masonry and concrete walls, as well as untrimmed door and window jambs. Standard lengths: 8', 9', 10'. Meets ASTM C1047, with the exception of B4 (1/2") and B4 NB (1/2"). ALSO AVAILABLE IN USG BEADEX® BRAND Use for applications where nailing or other mechanical fastening is required. Creates 135°...

Open the catalog to page 11