Catalogs >
USG >
USG SHEETROCK® BRAND FLEXIBLE GYPSUM PANELS

USG SHEETROCK® BRAND FLEXIBLE GYPSUM PANELS
3Pages

Catalog excerpts

Interior Panel & SUBMITTAL SHEET INTERIOR INSTALLATION, FINISHING AND DECORATING INSTALLATION USG SHEETROCK BRAND FLEXIBLE GYPSUM PANELS 1/4 in. (6.4 mm) flexible panels for curved walls, archways and staircases • More flexible than standard 1/4 in. (6.4 mm) USG Sheetrock® Brand Gypsum Panels • Designed to easily construct curved surfaces • Comply with ASTM C1396, Standard Specification for Gypsum Board, for 1/4 in. (6.4 mm) gypsum wallboard • Underwriters Laboratories Inc. (UL) Classification as to surface-burning characteristics and noncombustibility • Achieved GREENGUARD Gold Certification and qualifies as a low VOC emitting material (meets CA 01350) DESCRIPTION USG Sheetrock® Brand Flexible Gypsum Panels are 1/4 in. (6.4 mm) panels designed to offer greater flexibility than standard 1/4 in. (6.4 mm) USG Sheetrock® Brand Gypsum Panels. Ideal for curved walls, archways and staircases, these flexible gypsum panels feature a noncombustible gypsum core that is encased in 100% recycled face and back papers that form a high strength composite design. The face paper is folded around the long edges to reinforce and protect the core, and the ends are cut square and even. The long edges of the panels are tapered, allowing joints to be reinforced and concealed with USG Sheetrock® Brand joint treatment systems. INTENDED FOR • Commercial or residential applications where 1/4 in. (6.4 mm) flexible panels are desired • New or repair and remodel construction • Wood- or steel-framed wall and ceiling applications • An additional layer for improving sound control in double-layer wood- and steel-stud partitions • Face layer over old wall and ceiling surfaces LIMITATIONS 1. Avoid exposure to sustained temperatures exceeding 125°F (52°C). 2. Avoid exposure to excessive, repetitive or continuous moisture before, during and after installation. Eliminate sources of moisture immediately. 3. Must be stored off the ground and under cover in accordance with Gypsum Association's GA-801, Handling and Storage of Gypsum Panel Products. For maximum framing spacing in non-fire-resistance-rated applications of gypsum panel products, refer to Gypsum Association's GA-216, Specifications for the Application and Finishing of Gypsum Panel Products or ASTM C840, Standard Specification for Application and Finishing of Gypsum Board. For fire-resistance-rated applications, refer to the published UL Design or GA File Number. For installation recommendations for curved surfaces, refer to Gypsum Association's GA-226, Application of Gypsum Board to Form Curved Surface. Maximum Framing Spacing for Single-Layer Application1 Notes: 1. 1/4 in. (6.4 mm) panels shall not be used in single-layer applications on either walls or ceilings. 2. For double-layer ceilings, adhesive must be used to laminate 1/4 in. (6.4 mm) gypsum wallboard. 3. 1/4 in. (6.4 mm) panels are not recommended on ceilings to receive water-based texture material.

Open the catalog to page 1

INTERIOR INSTALLATION, FINISHING AND DECORATING, CONT. FINISHING AND DECORATING For high-quality finishing results, USG recommends USG Sheetrock® Brand finishing products. Painting products and systems should be used that comply with recommendations and requirements in Appendices of ASTM C840. For priming and decorating with paint, texture or wall covering, follow manufacturer's directions for materials used. Gypsum Association's GA-214, Recommended Levels of Finish for Gypsum Board, Glass Mat and Fiber-Reinforced Gypsum Panels should be referred to in order to determine the level of...

Open the catalog to page 2

Notes: 5. Other sizes available by special order. Check with your local USG representative for availability. 6. Represents approximate weight for design and shipping purposes. For specific product weight in your area, contact your local USG representative or call the Customer Service Center at 800 950-3839. COMPLIANCE Comply with ASTM C1396 for 1/4 in. (6.4 mm) gypsum wallboard Classified as a Class A Interior Finish Material per Section 803.1 of the International Building Code® (I BC®) UL Classification as to surface-burning characteristics and noncombustibility Achieved GREENGUARD Gold...

Open the catalog to page 3