Catalog2007
92Pages

U.S.F. Fabrication, Inc. Eastern Plant: 3200 West 84 Street, Hialeah FL 33018 Western Plant: 2382 Rulon White Blvd., Ogden, UT 84404 Local: (305) 556-1661, Fax: (305) 882-1577 USA & Canada: (800) 258-6873 Website: www.usffab.com E-Mail Address: service@usffab.com International E-Mail Address: export@usffab.com M ADEINU SA WaiCii'iy U.S.F. Fabrications aluminum floor access doors are guaranteed to be free of defects in materials and workmanship for a period of ten (10) years from the date of purchase. Any part that fails under normal use will be furnished at no charge. This warranty Is invalid if the product is modified, damaged, improperly installed or used in an appliﮭcation for which it is not intended.

U.S.F. FABRICATION, INC. GENERAL INFORMATION ORDER BY CATALOG NUMBER: EXAMPLE: Angle Frame, Pedestrian Loading, Single Door, 300 P.S.F., 30 x 48, Aluminum, Options (if required) APS 300-30 X 48 ALUM. (OPTIONS) i_,_i l FRAME TYPE: 1 A-ANGLE T-TROUGH B-BASIN COVER R-ROUND F-FLOODTIGHT MATERIAL A X B DIMENSIONS PEDESTRIAN LOAD RATING: 150 OR 300 P.S.F. (APS/APD ALUM. ONLY) LOADING: DOOR TYPE P-PEDESTRIAN H-HEAVY DUTY S-SINGLE D-DOUBLE FLOOR ACCESS DOOR INSTALLATION Assure that the concrרte (or other material) is completely under bottom face of frame. Also, the material used must be designed to...

U.S.F. FABRICATION, INC. Angle frame, Pedestrian loading, Single door aluminum The angle frame floor access door is designed for interior and exterior applications where watertightness is not required. SPECIFICATIONS: The floor access door shall be Model APS as manufactured by U.S.F. Fabrication, Inc. with the size being specified on the plans. Door leaf shall be 3/16 or 1/4-inch thick aluminum diamond plate reinforced respectively for a 150 or 300 p.s.f. live load. The frame shall be extruded aluminum with an integral anchor flange and door seat on all four sides. The floor access door...

U.S.F. FABRICATION, INC tXTRUDED ANGLE FRAME WITH INTEGRAL SEAT & CONTINUOUS ANCHOR FLANGE FLUSH LIFTING HANDLE 1= h F D B DIAMOND PLATE -3/16 FOR (5 MM) -1/4 FOR P.S.F. (732 KG./SO. M) 300 P.S.F. [H64 KG./SO. M) ■: mm) < 316 STAINLESS STEEL HINGES WITH TAMPER PROOF BOLTS c 316 STAINLESS STEEL AUTOMATIC HOLD OPEN ARM WITH RED VINYL GRIP UATERIAL: ALUMINUM WITH 316 STAINLESS STEEL NUTS & BOLTS. HINGES. AND HOLD OPEN ARM. _OADING: 150 OR 300 LBS. PER SO. FOOT (732 OR 1464 KG. PER SO. M) OPTIONAL FFATURES STAPLE FOR PADLOCK □ S.S. HORIZONTAL SPRINGS □ S.S. SLAMLOCK □ BITUMINOUS PAINT ON AREA...

■S.F. Angle frame, Pedestrian loading, Double door aluminum The angle frame floor access door is designed for interor and exterior applications where watertiqhtncss Is not required z D Z Z D SPECIFICATIONS: The floor access door shall be Model APD as manufactured by U.S.R Fabrication, Inc. with the size being specified on the plans. Door leaves shall be 3/16 or 1 /4-inch thick aluminum diamond plate reinforced respectlvely for a 150 or 300 p.sJ. iive load. The frame shall be exlruded aluminum with an Intgral anchor tlange and door seat on ail four sides. The floor access door shall be...

F flush lifting handle extruded angle frame with integral seat Secontinuous anchor flange D z C A diamond plate -3/16 for 150 p.s.f. (5 mm) (732 kg./so m) -1/4 for 300 p.s.f. (6 mm) (1464 kc./sq. m) IFF1 i H i I i r 5taple for padlock < 316 stainless steel automatic hold open arm with red vinyl grip 316 stainless steel hinges with tamper proof bolts OPTIONAL FEATURES □ s.s. horizontal springs □ s.s. slamlock □ bituminous paint on area in contact with concrete □ others (see page 6):_ mqt_ uaterial: aluminum with 316 stainless steel nuts Se bolts, hinges, and hold open arm. loading: 150 or...

U.S.F. FABRICATION, INC. Angle frame, Pedestrian loading, Single door with trash access door aluminum The angle frame floor access door includes a trash access door and is designed for interior and exterior applications where watertightness is not required. SPECIFICATIONS: The floor access door shall be Model APS with integral trash access door as manufactured by U.S.F. Fabrication, Inc. with the size being specified on the plans. Door leaves shall be 3/16 or 1/4-inch thick aluminum diamond plate reinforced respectively for a 150 or 300 p.s.f. live load. The frame shall be extruded aluminum...

U.S.F. FABRICATION, INC. (25 MM) (533 MM) EXTRUDED ANGLE FRAME WITH INTEGRAL SEAT & CONTINUOUS ANCHOR FLANGE 1 -FLUSH LIFTING HANDLE 24 30 (609 MM) (761 MM) D B DIAMOND PLATE -3/16 FOR 150 P.S.F. (5 MM) (732 KG./SQ. M) -1/4 FOR 300 P.S.F. (6 MM) (1464 KG./SQ. M) TRASH DOOR ACCESS 316 STAINLESS STEEL HINGES ITH TAMPER PROOF BOLTS c 316 STAINLESS STEEL AUTOMATIC HOLD OPEN ARM W/RED VINYL GRIP STAPLE FOR PADLOCK OPTIONAL FEATURES □ S.S. HORIZONTAL SPRINGS □ S.S. SLAMLOCK □ BITUMINOUS PAINT ON AREA IN CONTACT WITH CONCRETE □ OTHERS (SEE PAGE 8):_ (457 MM) NOTE: -MATERIAL: ALUMINUM WITH 316...

U.S.F. FABRICATION, INC. Angle frame, Heavy-duty, Single door aluminum The heavy-duty angle type floor access door is designed for intehor and exterior applications where watertightness is nol required It is designed for off-street locations that may occasionally receive AASHTO H-20-44 wheel loads. z D Z Z SPECIFICATIONS: The floor access door shall be Model AHS as manufacturai by U.S.F. Fabrication, Inc. with the slze being specified on the plans, Door leaf shall be 1/4nnch thtck aluminum diamond plaie reinforced for an AASHTO 1+20*44 wheel load, Upon request, manufacturer shall provide...

U.S.F. FABRICATION, INC EXTRUDEO ANGLE FRAME WITH INTEGRAL SEAT 8cCONTINUOUS ANCHOR FLANGE l Z 1/4(eum; DIAMOND PLATE < REMOVABLE KEY WRENCH 3- [76 mm) HEAVY DUTY 316 STAINLESS STEEL HINGES WITH TAMPER PROOF BOLTS EXTRUDED ANGLE FRAME WITH INTEGRAL 2" (si mm) SEAT cCONTINUOUS 1" (25mm) ANCHOR FLANGE OPTIONAL FEATURES MATERIAL: ALUMINUM WITH STAINLESS STEEL SPRINGS, 316 STAINLESS STEEL NUTS SeBOLTS HINGES. AND HOLD OPEN ARM. LOADING: DESIGNED FOR OFF-STREET LOCATIONS WHICH MAY OCCASIONALLY RECEIVE H-20 WHEEL LOADS. BITUMINOUS COAT1NG IS APPLIED TO AREA OF FRAME IN CONTACT WITH CONCRETE....