kmfmuiKim URBANSG\PE Substrate holder Description The Anti-Shear Urbanscape Substrate Holder is a plastic grid made of recycled HDPE/LDPE. It can be supplied in types S50 and S75, depending on the applied system build-up scheme. The Urbanscape Substrate Holder type S50/S75 is applied as a substrate holder on sloping surfaces. The cells of the Urbanscape Substrate Holder are filled with substrate and prevent the substrate from shearing. The Urbanscape Substrate Holder is applicable on sloping surfaces of more than 25 degrees. The Urbanscape Substrate Holder panels can be joined together with the help of locking wedges. They ensure a perfect matching and stability of the panels. The panels can be installed loose on the roof. If necessary, an extra roof edge can be applied to prevent the panel from shearing. For more information, please contact our office. Benefits of Urbanscape Green Roof System > High water absorption > High thermal performance > High acoustic performance > High fire resistance Property Urbanscape Substrate Holder S50 Urbanscape Substrate Holder S75 Width 1.64 kg/panel 2.25 kg/panel Skofja Loka, Trata 32, 4220 Skofja Loka, Slovenia All rights reserved, including those of photomechanical reproduction and storage in electronic media. Extreme caution was observed when putting together and processing the information, text and illustrations in this document. Nevertheless, errors cannot be completely ruled out. The publisher and editors cannot assume legal responsibility or any liability for incorrect information and consequences thereof. The publisher and editors will be grateful for improvement suggestions and details of possible errors pointed out. For the most up-to-date document versions and product information, please always refer to our website. Knauf Insulation Urbanscape | Substrate holder | valid from January 2025 | www.urbanscape-architecture.com | Page 1