Uponor Smatrix
72Pages

Technical information

2 | Uponor Smatrix | Technical information

1.1 Intelligent controls for heating and cooling Smatrix is Uponor’s product line of fully integrated control systems for radiant heating and cooling. Developed to fully leverage the advantages of a radiant system, Smatrix increases energy-efficiency while ensuring optimal comfort in every single room. With intelligent room, zone and supply water controls, Smatrix offers modular and expandable systems that are easy to install and meet the requirements of any building project - from new build to renovation. Key features include Uponor’s autobalancing technology that can save up to 20 % in...

a high protection to avoid condensation. If the humidity in a single room gets too high, the cooling process can be automatically stopped or a notification given. It is even possible to integrate a dehumidifier into the system. also provided with in-app help texts, explaining the settings in detail and removing the need of a manual (which also is available in the app). Some cooling installations using multiple emitters, such as floor and fancoils, might require the autobalancing function to be switched off. See the Installation and operation manual for more information. Uponor Smatrix Base...

2 Room control - Functions This list show available functions for the different systems. All functions are described later in this chapter. Technical function Wave Pulse Base Pulse Uponor cloud services Data storage Pump management System diagnostics Installation and configuration functions Wave Pulse Base Pulse Room bypass Installation wizard Basic Functions Wave Pulse Base Pulse Cooling function Room check Offline configuration Over-the-air updates Third-party remote support Comfort function Wave Pulse Base Pulse Smart notifications Trend visualization Multi home control Smart home...

Autoblancing disabled:In rooms where underfloor heating/ cooling is allowed. Underfloor cooling and ceiling cooling is both started when the room termperature is about 1 degree below setpoint. Autobalancing enabled: Ceiling cooling and underfloor cooling will follow the current cooling demand. This gives more even floor temperatures and faster system reaction times with lower energy consumption than any standard on/off system. While manual hydraulic balancing only takes account of initial conditions, the autobalancing function automatically adjusts the temperature changes in the system or...

Multi home control The room controller is designed with the option of modular placement in mind. This means that all major parts are detachable and can be placed separately (some extra wiring may be required depending on placement). The Uponor Smatrix Pulse app allows users to get remote access to multiple Uponor Smatrix Pulse systems (no limit on number of systems). This way it is possible to configure and operate multiple installations, e.g. holiday homes, at anytime from anywhere. 2.2 Installation and configuration functions Installation wizard The Uponor Smatrix Pulse app contains an...

registration data), manual restoration of backup, data logging (room data, controller data, system data and events) and upgrading software. Room check Note In Base PRO systems, this function is only available to systems with less than 5 controllers. Pump management The circulation pump is connected either to the room controller relay or via a wireless relay module (Wave Pulse only). Individual pump: Relay function is set on a room controller basis. One circulation pump per room controller is connected to relay 1. When there is a demand to a specific room controller, only the pump connected...

3 Supply water control - Functions This list show available functions for the different systems. All functions are described later in this chapter. Basic Functions Multi zone management radiators etc.), domestic hot water, or meltaway (snow melting) to keep large areas clear of snow. Heating/cooling application Using the heating/cooling application enables up to three zones to be setup for heating and/or cooling with different radiant systems (such as underfloor loops, ceiling panels etc.), domestic hot water, or meltaway (snow melting) to keep large areas clear of snow. Cooling function...

Uponor Smatrix Move Uponor Smatrix Move can switch between heating and cooling by integrating with an Uponor Wave Pulse system, using a physical heating/cooling switch connected to the supply water controller, or via a digital thermostat registered to the supply water controller (requires antenna A-155). These options cannot be combined in a Move system with a wireless thermostat, since the HC option in parameter 11, or 12, is disabled when a digital thermostat is registered to the supply water controller. Uponor uses an Offset temperature to adjust the setpoints when switching between...

A relative humidity sensor within the Smatrix Base PRO system is used to avoid condensation problems while in cooling mode. Pump management Uponor Smatrix Move Uponor Smatrix Move can control a circulation pump according to current heating/cooling demand for the zone. Uponor Smatrix Move PRO Caution! The connection terminals are limited to 1A. An external relay might be needed. Uponor Smatrix Move PRO can control a circulation pump according to current heating/cooling demands in up to 4 different zones with the heating application (3 different zones with the heating/cooling application)....

4 Room control - Component description This section briefly describes the some of the components in the Uponor Smatrix product family. For more detailed information and installation instructions, please see the installation and operation manuals for each system. Application examples describing different installation possibilities are presented in the second half of this document. See Application examples – Wave Pulse, Page 32, Application examples – Base Pulse, Page 51 or Application examples – Move PRO, Page 65 (non residential with Base PRO) for more information. Uponor Smatrix Pulse app...