SW4 CABLE LADDER
8Pages

SPEEDWAY CABLE LADDER SYSTEMS The Speedway Cable Ladder System represents a major advance in cable ladder design, providing faster and easier installation, a unique coupler locking system and a comprehensive range of accessories. The Speedway Cable Ladder System is subject to Registered Design, Trade Mark and Patent considerations and conforms to BS EN 61537:2007. SPEEDWAY – FOR WHEN IT MATTERS THE LADDER SYSTEMS are manufactured in 3 heights: SPEEDWAY 4 (SW4) - 110mm overall height SPEEDWAY 5 (SW5) - 125mm overall height SPEEDWAY 6 (SW6) - 150mm overall height SYSTEM ATTRIBUTES Special Profiled Side Section: 1. Enhanced structural rigidity. 2. Increased internal width for cables. 3. High performance coupling. 4. Safety edge. Slotted Side Section: 1. Allows faster installation as the ladder can be cut to any length and coupled without on-site drilling. 2. Fixing to ladder sides. 3. Reduced weight. Shallow Channel Rungs: 1. The welding of the rungs to the lowest point of the side section ensures maximum loading height. 2. High strength even in the widest ladders. 3. Use of every known type of cleat, tie and bonding with infinite adjustment. 4. Rungs alternately inverted (on lengths)permitting suspension of light fittings etc.from underside. Speedway Cable Ladder is supplied in various materials and finishes: LADDER & FITTINGS GY Hot dip galvanized Vantrunk Extreme Steel (Steel BS EN 10025-2 and Galvanising BS EN 1461:2009) COVERS & ACCESSORIES GA Hot dip galvanized Mild Steel (Steel BS EN 10111 and Galvanising BS EN 1461:2009) LADDER, FITTINGS, COVERS & ACCESSORIES GX Hot dip deep galvanized after manufacture to BS EN 1461:2009 SS Stainless steel grade 1.4404 (316 marine) to BS EN 10088-2:2005 ACCREDITED TO THE FOLLOWING STANDARDS

Standard Trunking Multi Compartment Trunking SPEEDWAY CABLE LADDER SYSTEMS Speedway 4 (SW4) Medium Duty Cable Ladder is manufactured in 3.0m lengths as standard with 6.0m lengths to order. The cable ladder is available in standard widths of 150mm, 300mm, 450mm, 600mm, 750mm and 900mm, although other widths up to 1050mm are available to order. Rung spacing is 300mm as standard. Cable Tray Lighting Trunking Speedway SW4 Cable Ladder Cable Basket System Speedway Cable Ladder Channel & Support Floor Trunking Part Number Loading Depth Ladder Width Maximum Internal Width Overall Width Flange...

SPEEDWAY CABLE LADDER SYSTEMS Speedway SW5 Cable Ladder Speedway 5 (SW5) Heavy Duty Cable Ladder is manufactured in 3.0m lengths as standard with 6.0m lengths supplied to order. The cable ladder is available in standard widths of 150mm, 300mm, 450mm, 600mm, 750mm, 900mm and 1050mm, although other widths up to 1500mm are available to order. Rung spacing is 300mm as standard. Ref.SW5/SL3/Width/Finish Part Number Loading Depth Ladder Width Overall Width Maximum Internal Width Flange Width = Select a Finish & Material refer to Page 82 Weights shown are for standard hot dip galvanised finish...

Lengths Standard Trunking Fittings Multi Compartment Trunking SPEEDWAY CABLE LADDER SYSTEMS Speedway SW6 Cable Ladder Cable Tray Uniklip Couplers Lighting Trunking Speedway 6 (SW6) Extra Heavy Duty Cable Ladder is manufactured in 3.0m lengths as standard with 6.0m lengths supplied to order. The cable ladder is available in standard widths of 150mm, 300mm, 450mm, 600mm, 750mm, 900mm and 1050mm, although other widths up to 1500mm are available to order. Rung spacing is 300mm as standard. Covers Cable Basket System Speedway Accessories Cable Ladder Technical Channel & Support Floor Trunking...

SPEEDWAY CABLE LADDER SYSTEMS Cable Ladder Fitting with Speedlock Integral Coupler Fast fit, total cost saving through reduction of the number of couplers and fixings required. The integral coupler has a formed shape which increases strength and rigidity and reduces joint hinging. Integral Coupler Cross Ref.SW-/C/Width/Radius/Finish Ref.SW-/FE Angle/Width /Radius/Finish Ref.SW-/ET/Width/ Radius/Finish Can also be manufactured unequal. Supplied c/w fixings. Please note straight ladder covers are supplied in 1.5m lengths. Short Adjustable Coupler Ref.SW-/OR Angle/Width /Radius/Finish Overall...

Standard Trunking Multi Compartment Trunking SPEEDWAY CABLE LADDER SYSTEMS Adjustable Fixing Bracket Lighting Trunking Long Adjustable Coupler Overall length 450mm Used as an alternative to Reducers/ unequal tees. Supplied c/w fixings. External Flange Clamp Ref.SW/EFC/Finish Horizontal Adjustable Coupler Fixings ordered separately. Speedway Cable Ladder Cable Tray Cable Basket System Vertical Adjustable Coupler Fixings ordered separately. Channel & Support Hold Down Bracket Straight Ladder Divider Reducer Left Hand Steel Conduit (Class 4) Straight ladder dividers are 1.5m long. Fixings...

SPEEDWAY CABLE LADDER SYSTEMS Earth Braid The Speedway Earth Bonding Strap (EBS01) is designed for use in installations where an additional means of earthing or electrical bonding is specified. The Speedway Earth Bonding Strap comprises of a 16mm2 tinned copper braid crimped into M10 tinned copper end connectors. The Speedway Earth Bonding Strap is common to Speedway SW4, SW5, & SW6. Pre-punched holes for fixing the earth bonding strap are located at each end of the ladder and fittings. These illustrated graphs are indicative of the performance of Speedway SW4, SW5 and SW6 Cable Ladder in a...

• The overall installation time, weight and cost. visit online: uk unitrunk.co.uk ireland unitrunk.ie Standard Trunking Multi Compartment Trunking Index Accessories & Supports Innovative Design Solutions Steel Conduit (Class 4) Bench Outlet & Perimeter Trunking Floor Trunking Cable Basket System • The number of fixings required to connect the ladder and fitting, in turn reducing the ladder to fitting connection by 67% Channel & Support All Speedway fittings are manufactured with the Speedlok Integral Coupler as standard; this represents a major advance in modern cable management design,...