Standard trunking
6Pages

Total Cable Management Solutions STANDARD TRUNKING SYSTEMS Unitrunk Cable Trunking is a complete range of trunking and fittings manufactured to standards as described in BS EN 50085-1:2005 and is manufactured throughout in best quality hot dipped galvanised sheet steel to BS EN 10346:2009 giving maximum protection from corrosion. Standard Cable Trunking is manufactured and stocked in 3 metre lengths (other lengths available on request please refer to our code guide at the back of this section). • The Trunking has machine formed inturned, strengthening flanges. • The lid incorporates a quick action metal locking device operated by a slotted stud. The slot indicates the position of the locking bar. - (Note lid is secured using turnbuckle type fastener) • Each length of Standard Trunking is supplied complete with lid, Coupling, Screws and Nuts. • Fittings are manufactured from galvanised sheet steel to match the Trunking. • Bends, Elbows, Tees and Intersection Boxes are complete with integral couplings. • Special fittings such as OffSets, Risers, Unequal Tees and Bends can be made to order. • All dimensions relate to the inside measurement. ACCREDITED TO THE FOLLOWING STANDARDS LUL ACCREDITATIO

Standard Trunking Multi Compartment Trunking STANDARD TRUNKING SYSTEMS We stock a considerable range of sizes, for our full range of dimensions refer to page 31. Bespoke sizes available on request FULL SIZ GO TO E RANG E PAGE 31 Uniklip Unitrunk standard trunking is manufactured from pre-galvanised steel and is supplied in 3m lengths. Other sizes and finishes are available on request (See code guide at the end of this section). Gusset Bend Inside Lid Speedway Cable Ladder Bench Outlet & Perimeter Trunking Sharp Elbow Inside Lid Steel Conduit (Class 4) Innovative Design Solutions Accessories...

STANDARD TRUNKING SYSTEMS Sharp Elbow Outside Lid Flared Flange 28 Product Finishing Key (See page 24)

Standard Trunking Adjustable Bends (Horizontal) 0-35° Angle Lighting Trunking Adjustable Bends (Vertical) 0-35° Angle Multi Compartment Trunking STANDARD TRUNKING SYSTEMS Cable Tray Code eg: HAB22 (Adjustable Bend 50x50mm) Can be formed as an internal or external joint. Code eg: VAB22 (Adjustable Bend 50x50mm) Adjustable Lengths Coupler 0-15° Angle Socket Outlet Single Socket Outlet Double Speedway Cable Ladder Steel Conduit (Class 4) Trunking Coupling Bench Outlet & Perimeter Trunking Cable Support Floor Trunking Can be supply with off centre cutouts Channel & Support Cable Basket Systems...

STANDARD TRUNKING SYSTEMS Window Beam Clamp Dividing Fillets Supplied in 3 metre lengths. Supplied in 3 metre lengths. Metal Retaining Strap Flanged Coupling 50mm (Width) 75mm (Width) 100mm (Width) 150mm (Width) Sold in Pairs. Refer to the Trunking sidewall when ordering. (Example TK42 use FC22) Plastic Cable Retaining Strap Hanger Bracket Other sizes available on request. W Hanger Bracket (with Swing Bar) Product Finishing Key (See page 24) Available to suit 50mm, 75mm or 100mm widths. Note: For sizes over 100mm use LCS2 x2

Standard Trunking STANDARD TRUNKING SYSTEMS Multi Compartment Trunking CODE GUIDE STAINLESS STEEL 304 STEP 2: CHOOSE PRODUCT POWDER COATED STEP 3: CHOOSE SIZE Galvanised Steel Lid (Width Only) Trunking Coupling Dividing Fillet (loose) (Height Only) SOE Sharp Elbow (Outside Lid) Flared Flange Fire Barrier Clip Lid Clips (Strap and Stud) Flanged Coupling Cable Support Earth Link (Copper) x 10 Gusset Bend (Inside Lid) GOB Gusset Bend (Outside Lid) STE Sharp Elbow (Inside Lid) GOT Gusset Tee (Outside Lid) STT Sharp Tee (Top Lid) SIT TCES Earth Link (Tinned Copper) x 10 CR Cable Retainer Strap x...