UnJMDFcomfort BOARDS UniMDFcomfort is a wood based panel, type MDF according to EN 622-5. This board is suitable for industrial processing and general use in dry spaces (service class 1 according to EN 1995-1-1). ✓ Light and stable wood colour / High density ✓ Highly densified surface ✓ Low formaldehyde content (E1) ✓ Strong technical properties ✓ High sanding quality SUNILIN www.unilinpanels.com

UnJMDFcomfort BOARDS Description UniMDFcomfort is made from pine wood, which is responsible for its typical light and stable wood colour. During the manufacturing process, the wood fibres are mixed with UF glue and subsequently compressed under high pressure and at a high temperature to produce a homogeneous MDF board. The board has a high surface density and is sanded down to a fine finish. The highly densified surface allows for UniMDFcomfort to be used not only for mela-mination and veneering, but also to be painted or lacquered. This makes it extremely suitable for fitting out shops, interior...

UnJMDFcomfort BOARDS Certificates UNILIN, division panels is very actively committed to sustainable forest management. Which is why our wood based panels are also available with PEFC- and FSC-labels on request. For further information on CARB P2-certification in UniMDFcomfort-products, please contact your sales representative or our sales department at [email protected]. The quality of our products is assured by the ISO 9001 certificate, amongst others. Technical properties Property Test method Value Residual moisture EN 322 6 ± 2% Formaldehyde content: perforation value EN 120 a 8mg/100g....