Hydroflam Fire-retardant and moisture-resistant construction board for structural applications Hydroflam is an MUF-glued, fire-retardant chipboard that is extremely well suited to structural applications in damp spaces. The board only displays minimal expansion and swelling under the influence of high atmospheric humidity. Hydroflam has powerful fire-retardant characteristics (European classification Bs2, d0). Fires in the board go out by themselves and do not continue to glow after the source of heat has been taken away. What is more, Hydroflam retains its mechanical strength for a long time in situations involving fire. Hydroflam can be applied in both service class 1 and 2 (limited temperature and atmospheric humidity) and is suitable for biological hazard classes 1 and 2 of EN Standard 335-3. Protection against direct contact with water is required. Product class P5 Structural applications Fire retardant B-s2,d0 Moisture-resistant Tongue-and-groove joints (optional) Applications - Floors - Walls - Roofs - Interior

Hydroflam Applications Hydroflam is suitable as a structural board in applications where low reactivity to fire and flame spread are important (roofs, walls, stairwells, exit routes, lift shafts, corridors etc.) and where a higher resistance to fire is required (fire doors, fire walls etc.). Use the recommended tools when sawing, milling or drilling Hydroflam boards. Fire-retardant products may cause deposits on tools and shorten service life. Consult the UNILIN construction manual with detailed instructions for use and characteristic metrics at www.unilinpanels.com. General characteristics +...