Fibralux MR Black Gloss ® High quality moisture-repellent MDF board, for use in humid conditions. High-density MDF board, coloured black in the mass, with a transparent glossy finishing coat on both sides. This finish consists of an inert, UV-hardened lacquer which does not contain any harmful substances. This lacquer is resistant against a number of chemicals (DIN 68861-1, Class C) and does not contain any harmful components (in compliance with EN71-3 with regard to safety for children´s toys). Each panel has a self-adhesive protective film on both sides. The boards have a particularly screwable core. The board is subject to minimal expansion and swelling in conditions of high humidity. Fibralux MR Black Gloss is has low formaldehyde emission (E1 class). Moreover, Fibralux MR Black meets the requirements set by the California Air Resource Board. According to ASTM E 1333-96, formaldehyde emission is less than 0,11 ppm, which corresponds to CARB, phase 2 as set by the ACTM. This MDF board also meets the requirements of EPA, as set by TSCA Title VI. Characteristics MDF.HLS (EN 622-5) High density Structural applications Moisture resistant Core coloured Transparant gloss lacquer Applications - Interior decoration - Furniture production

Fibralux MR Black Gloss ® Applications The board can be applied in service class 2 (restrictions in temperature and ambient humidity) and can be used in biological hazard classes 1 and 2 of EN 335-3. During and especially after installation the boards must, wherever possible, be optimally protected from any direct contact with water. They must be stacked flat, on a pallet or using a sufficient number of cross members. Boards should not be stored vertically, unless ground contact can be avoided. The board will expand/shrink under variable humidity conditions, albeit to a lesser extent than standard...