High quality MDF board for non load-bearing applications in dry conditions. MDF board with a hard, fine and smoothly sanded surface. MDF Fibrabel has low formaldehyde emission (E1 class). Moreover, MDF Fibrabel meets the requirements set by the California Air Resource Board. According to ASTM E 1333-96, formaldehyde emission is less than 0,11 ppm, which corresponds to CARB, phase 2 as set by the ACTM. This MDF board also meets the requirements of EPA, as set by TSCA Title VI. Applications - Interior decoration - Furniture production - Skirtings & profiles

Applications MDF Fibrabel is suitable for interior decoration, industrial processing and furniture production. The board can be lacquered or finished with paper, foil, melamine, veneer or high-pressure laminate. The board must be applied in service class 1 (restrictions in temperature and ambient humidity) and can only be used in biological hazard class 1 of EN 335-3. The boards must be protected from any direct contact with water. They must be stacked flat, on a pallet or using a sufficient number of cross members. Boards should not be stored vertically, unless ground contact can be avoided....