STRUCTURAL INSULATED ROOF PANELS
28Pages

STRUCTURAL INSULATED ROOF PANELS Making the most of your roof space DIVISION INSULATION

UNILIN, division insulation We specialise in innovative insulation solutions for all types of building - including structural insulated panels for roofs and walls, and a full range of complementary products. Our systems reflect over 35 years of experience in the industry, continuous programmes of research and development, and the commitment of our dedicated, highly-trained staff. We are the European market leader in structural insulated roof panels. We have our own highly automated production system for chipboard, polyisocyanurate foam insulation and PIR insulation boards, with an output of...

“We have worked with UNILIN over the last couple of years developing our SIP building system. We carefully selected their products over several other manufacturers because of their quality and ability to meet our exacting requirements. We hope that as our company expands in the UK we will be able to grow our relationship with UNILIN to enable us to find new and innovative solutions to building and green construction projects.” "Having worked with UNILIN for many years we strongly believe their products to be the best available in the current market place. The panels give a high thermal...

STRUCTURAL INSULATED ROOF PANELS PRODUCT BENEFITS UNILIN is the ideal insulated roof panel - strong and rigid, light and economical, sophisticated and versatile. Panels can be pre-finished or ready for decoration, with a special acoustic panel for improved interior sound absorption. There is a UNILIN panel for every application. UNILIN panels are suitable for any type of roof covering – eg, traditional tiles, slates, concrete tiles, zinc etc, and for roof pitches 0° to 60°. Already over 90% of the Dutch market, up to 25% of the French and 15% of the Belgian market use Structural Insulated...

Trussed rafters Sarking membrane Roof covering UnIlIn structural roof panel systems offer a weathertight roof system ready to receive the roof covering. The system incorporates thermal insulation, rafters and ceiling board and is suitable for pitched, flat roofs and also walls. The panels form an integral part of the roof structure and replace traditional rafters. They are supported by purlins (timber or steel), ridge, intermediate beams where used, and wall plates. Traditional Roof Vapour control Applied wall/ceiling finish Supporting roof structure (purlins) UNILIN panels Roof covering...

PRODUCT SELECTOR and CUTTING SERVICE PITCHED ROOFS FLAT ROOFS uniPUR PLUS uniSPAN HPIR uniSPAN HPIR * Contact UNILIN for technical information and product feasibility. UNILIN ROOF PANELS: INNER FACINGS OSB (Oriented Strand Board) Contact the supplier of wall finishing materials for suitability with UNILIN panels. Timber Cladding WCB (White Painted Chipboard) uniSPAN HPIR UnIlIn has created the ideal roof panel - strong and rigid, light and economical, sophisticated and versatile, pre-finished or ready for decoration, and with a special acoustic panel (AB) for improved int

CUTTING SERVICE Angled cuts UnIlIn will cut your panels to fit your gutter and ridge. You will need to specify: Without cut. Permitted slope: 0° – 60° Vertical cut at ridge. Permitted slope: 0° – 60° Vertical cut at gutter. Permitted slope: 0° – 60° • The Cutting Type number (Type 0, 1, 2 ,3, 4, 5) • The Internal length, Il in mm or the Total length, Tl in mm • The angle of slope, (please specify a°, in degrees) Other cutting angles on request. Vertical cut at ridge and gutter. Permitted slope: 0° – 60° Horizontal cut at gutter. Permitted slope: 30° – 90° Horizontal cut at gutter Vertical...

INTRODUCTION A roof panel which is used to provide insulation and structural support for any kind of roof covering – eg, traditional tiles, slates, concrete tiles, zinc, etc with pitches of between 15° and 60°, in domestic and commercial buildings. The panels are suitable for refurbishment and new build. Incorporating PIR Foam is the key to the high performance of UNIPUR Panels. UNIPUR panels have the additional advantage of integral rafters, allowing simple installation of rooflights and openings, with the added benefit of greater spans than a sandwich panel with PIR. Description The UnIPUR...

Plasterboard-faced – economical roof panel. UnIPUR PB is a selfsupporting roof panel. d thickness (mm) height x width (mm) Maximum single span at 45° (mm) 13mm water-resistant, tapered edge plasterboard, glued and screwed to three timber rafters. Panels with a length greater than 6900mm are glued and nailed. The plasterboard is noncombustible, class ‘O’ to UK and Irish Building Regulations. Standard panel width Standard panel length * Note: Contact Unilin for availability (min. 200m2) e Note: Horizontal joints visible on underside of panel. Faced with gypsum fibreboard – nonflammable with...

Faced with oriented strandboard – a light and economical roof panel. UnIPUR OSB is a selfsupporting roof panel. Maximum single span at 45° (mm) On request the edges of the OSB can be chamfered. 12mm water-resistant OSB board glued and nailed to four timber rafters. On request the OSB board can be replaced by a 12mm waterresistant plywood (minimum 5 layers). Standard panel width Standard panel length * Note: Contact Unilin for availability (min. 200m2) e Note: Horizontal joints visible on underside of panel. UNIPUR CB and WCB Specifications UNIPUR CB and WCB Insulation Chipboard faced – a...

UNIPUR T&G+ Specifications UNIPUR T&G+ Solid timber boarding on 12mm chipboard – a sophisticated, pre-finished roof panel. Maximum single span at 45° (mm) UnIPUR T&G+ is a selfsupporting roof panel. 13mm pine tongue-and-groove boards with a backing of 12mm chipboard, glued and nailed to three timber rafters. Standard panel width Standard panel length Boarding width, 132mm (13mm thick). * Note: Contact Unilin for availability (min. 200m2) UNIPUR AB and WAB Specifications UNIPUR AB and WAB Insulation Acoustic perforated chipboard for improved interior sound absorption. UnIPUR AB is a...