Udi FLEX
1 / 2Pages

UdiFLEX® SYSTEM FLEXIBLE WOOD-FIBRE INSULATION UdiFLEX® SYSTEM Flexible wood-fibre insulation Due to its adaptability, snug fitting characteristics and resistance to settling, particularly suited as insulation for voids, exterior and partition walls and ceilings in timber-framed constructions. It is also an excellent roof insulation material for newly constructed buildings and the modernisation of existing stock. It is very kind to the skin and does not cause any irritation when preparing or installing. Product Characteristics • A flexible, diffusion permeable wood-fibre insulation material with excellent insulating properties • Regulates the air moisture through its high absorption properties • It is structurally stable, does not tear and has high resistance to settling • Provides a very snug fit and firm hold in void installations • Kind to the skin and irritation-free • Resonance-free acoustic absorption Insulation knife UdiFLEX® SYSTEM For simple and waste-free preparation on-site. Our specially designed insulation knife provides a clean-cut edge and is particularly easy to use. It is manufactured from top quality stainless steel with a scalloped cutting edge. Ecological and environmentally-friendly – manufactured from sustainable timber sources Excellent thermal retention capacity for a super heat-shield in the summer Outstanding insulation properties against the cold Simple to use and easy to install Recyclable Delivery form Delivered on palettes; weather-resistant packaging (not waterproof) Installation information UdiFLEX® is suitable for use in the following areas (in accordance with EN 4108-10): Insulation between rafters, double-skin roofs, covered or non-covered attic floors; Interior insulation of ceilings and roofs, insulation under the rafters of the bearer construction, suspended ceilings etc.; Exterior wall insulation behind cladding in timber-framed constructions or curtain walls; The insulation of timber-framed constructions and other similar timber constructions; The insulation of partition walls. For simple and waste-free preparation on-site, we recommend the use of the UdiFLEX® Insulation knife. Our specially designed insulation knife provides a clean-cut edge and is particularly easy to use. It is manufactured from top quality stainless steel with a scalloped cutting edge. To ensure a professional result when cutting large quantities, we recommend the use of an electric knife or saw with vacuum extraction such as a jigsaw with a scalloped edge, a crosscut saw, a band saw or a circular saw. For more information on machines please call +49 (0) 371-81 56 40 or enquire at your nearest UdiSpecialist merchant. In order to meet the increasing demands expected of thermal insulation and to avoid building damage, we recommend our UdiSTEAM Air- & wind-proof products for the building exterior.

NEW UdiFLEX Flexible Wood-fibre insulation according to DIN 13171, 1350 x 575 mm 191040 40 mm thick, 10 Packets/ 10 Boards Single packet 191050 50 mm thick, 10 Packets/ 8 Boards Single packet 191060 60 mm thick, 10 Packets/ 6 Boards Single packet 191080 80 mm thick, 10 Packets/ 5 Boards Single packet 191100 100 mm thick, 10 Packets/ 4 Boards Single packet 191120 120 mm thick, 8 Packets/ 4 Boards Single packet 191140 140 mm thick, 8 Packets/ 3 Boards Single packet 191160 160 mm thick, 8 Packets/ 3 Boards Single packet 191180 180 mm thick, 10 Packets/ 2 Boards Single packet 191200 200 mm...