duripanel TECHNICAL WOOD AND CONCRETE FLAT BOARD Suitable for: Interior Decoration, Flooring and Industrial Applications. UMBELINO MONTEIRO ROOFING FOR A LIFETIME www.umbelino.pt

TECHNICAL WOOD AND CONCRETE FLAT BOARD FOR INTERIOR DECORATION DESCRIPTION: Medium-density wood and concrete particle board, compliant with EN 634-2, class 1; with CE identification according to EN 13986. Wide range of thicknesses - from 8 mm to 40 mm. Standard formats: 3,100 mm / 2,600 mm x 1,25 0mm. Finishes: Grey colour pattern - concrete. Sanding on both sides, beige colour, with the appearance of fine wood shavings. Duripanel B is suitable for general construction and interior decoration, wooden constructions (Z-9.1-120-certified), construction of containers, improvement of acoustic insulation...

TECHNICAL WOOD AND CONCRETE FLAT BOARD FOR FIRE PROTECTION DESCRIPTION: Medium-density wood and concrete particle board, compliant with EN 634-2, class 2; with CE identification according to EN 13986. Wide range of thicknesses – from 8 mm to 32 mm. Standard formats: 3,100 mm / 2,600 mm x 1,250 mm. Finishes: Grey colour pattern – concrete. Sanding on both sides, beige colour, with the appearance of fine wood shavings. Duripanel A is indicated as a technical wood and concrete flat board for protection against fire. Interior Flooring: Self-supporting floor boards. Ceilings: Self-supporting ceiling...

TECHNICAL WOOD AND CONCRETE FLAT BOARD FOR FLOORING DESCRIPTION: Duripanel Flooring | B1: Medium-density wood and concrete particle board, compliant with EN 634-2, class 1; with CE identification according to EN 13986. Class B, combustible material, very limited contribution to fire, compliant with DIN 4102-1; B - s1, d0 (EN 13501-1). Duripanel Flooring | A2: Medium-density wood and concrete particle board, compliant with EN 634-2, class 2; with CE identification according to EN 13986. Class A2, non-combustible material, compliant with DIN 4102-1; A2 - s1, d0 (EN 13501-1). Boards with snap-fit...

n1 Width (mm) n2 Width (mm) hi Depth h2 Depth d1 Thickness at which groove starts (mm) d2 Thickness at which it starts = 6.5, with a thickness of 18-22 mm/with 25+29 mm = 6.0, with a thickness of 18-22 mm/with 25+29 mm = Always 10.0 mm = always 8.5 mm = 625 with a thickness of 18 mm/6.75 with 19 mm/8.25 with 22 mm/8.75 with 25 mm/10.75 with 29 mm = 6.5 with a thickness of 18 mm/7.0 with 19 mm/8.5 with 22 mm/9.0 with 25 mm/9.0 with 25 mm/11 with 29 mm = 2° with a thickness of 18-22/1.5° with 22-29 mm DURIPANEL B1 FLOORING Panel Thickness Dimensions Board Board Price/€ Board Thickness...

COFRAGEM PERDIDA TECHNICAL WOOD AND CONCRETE FLAT BOARD FOR LOST FORMWORK LOST FORMWORK: These application instructions have been specifically designed for the use of DURIPANEL for lost formwork LOAD CHARTS Pass-through loads - Max q (kg/m2) applied to ensure a safety factor = 3. The weight of the DURIPANEL panel itself and 19.61 kg/m2 for the top lining (Max q = q300 - (1471.05 kg/m2.d in m) -19.61 kg/m2) were taken into account. Pass-through loads were calculated based on the permissible flexural tensile strain and a maximum deflection of 1/300. Transverse Strain AAAAAAA AAA A~~AA A~AA 6 x...

STRENGTH CHARACTERISTICS The following table shows the different workloads, based on the thickness of the board and the gap between supports. The minimum thickness of the board will depend on the safety factor. The following calculations were based on the strength characteristics of the weakest part of the board. The following table shows the maximum load per board, calculated for a safety factor of 3 and maximum deflection of L/300 or L/200, including the weight of the board itself. Maximum Load per board (kg/m2) (safety factor = 3, maximum deflection < l/300) including the weight ofthe board...

HEALTH AND SAFETY ASPECTS When installing or cutting the boards, dust particles may be released, which may irritate the eyes and respiratory tract. We recommend the use of a dust mask and safety goggles. Appropriate dust extraction and ventilation facilities must be considered, depending on the space in which the work will be executed and the equipment used. Lengthy exposures to dust without proper protection may be harmful to health. In addition, all general provisions in force concerning Occupational Health and Safety, as well as other official regulations within this scope, particularly the...