CAT_ENKOFORM VMK_EN
12Pages

Timber beam formwork // Versatile and polyvalent system for any vertical geometry Features Benefits Solutions Basic components

ENKOFORM VMK Timber beam formwork Formwork system for vertical structures in civil engineering and building construction. The panels are pre-assembled consisting of MK walers and timber beams as board support. Excellent finishes and great performances in the construction of walls, piers, abutments, columns... Based on the MK system, the panels are shaped to measure according to needs. Formwork adapted to the defined concrete pressure. System Components: The unit element of the system is the panel. The placement of some panels next to each other will make possible to adjust to the required...

ENKOFORM VMK Timber beam formwork // Features Unlimited flexibility The panels are designed and assembled according to the requirements of the project: Geometry: customized panels with the needed dimensions, built with standard parts. Concrete pressure: formwork optimised according to the defined concrete pressure. It is not necessary to previously confront the panels to introduce the ties, therefore the position of the tie holes on the panels can be customized. It is possible to get even larger concrete pressure resistances than with the modular formworks. Panel configured for concrete...

ENKOFORM VMK Timber beam formwork // Benefits High performance · Panel joints are simple, adjustable and watertight; the requirement for fillers between panels is minimal · Saves time in assembling, thanks to the easy joining between MK walers and wooden beams. · Sending the material disassembled to the jobsites means smaller transportation volume. Pre-assembled panels Joint for MK waler with with the beam VM20 flexibility · Possibility of adjust as much as possible to both the wall geometry and concrete pressure. · The solutions for corners, pilasters and closures are easier than in...

ENKOFORM VMK Timber beam formwork · Secure lifting of panels using the Lifting bracket E V-100, which it has the “CE” mark corresponding to the European Directive 98/37/CE on machinery. The maximum working load for each Lifting bracket E V-100 is 1300 kg (13 kN). Placing the lifting bracket on the beam web Identification plate detail Lifting panel with crane · Phenolic plywood PEFC : Chain of custody. · It provides excellent results for arquitectural fair-facedconcrete surfaces and predefined wall pattern of form ties. material used for this component has been responsibly so

ENKOFORM VMK Timber beam formwork // Solutions Thanks to the versatility and polivalency offered by the system, it can be adjusted to various geometries. 10 1 Joint between panels 6 Pilasters - T wall intersections 4 Corner making an angle other than 90° 9 Single-sided wall formwork Joint between panels Joint without fillers: The component used to join two PANELS together (with no filler between them) is the panel connector MK. This type of joint makes it possible to: · bring the panels over and link them together hermetically when positioning them in their right place. It warranties the...

ENKOFORM VMK Timber beam formwork Joint with fillers: Joining the panels with fillers can be made through the filler panel or with the compensation plate. This type of joining makes the following possible: · connect 2 panels with a gap between them. · correct possible errors that may be made in the assembly of the panels. / Filler panel: / Compensation plate: Wall geometry 90º corners: In 90º corners, the outer and inner parts will be solved in different ways: Outside: / Outside corner head MK: Corner making an angle other than 90°:

ENKOFORM VMK Timber beam formwork Bulkheads: Easy and practical solution for bulkheads, placing a bulkhead panel perpendicularly between the 2 panels. Stripping of wall with bulkhead panel Pilasters - T wall intersections: Pilasters formwork or T wall intersections can be resolved using the solution with waler extension MK or the solution with corner connector MK. / Solution with waler extension MK: / Solution with corner connector MK: Column formwork The column formwork consists of two column panels joined to each other by means of the outside corner head MK, wedges MK, tie rods 15 and...

ENKOFORM VMK Timber beam formwork Climbing formwork Circular formwork Single-sided wall formworks

ENKOFORM VMK Timber beam formwork ENKOFORM VMK Basic components kg OUTSIDE CORNER HEAD MK LIFTING-JOINT ELEMENTS TIMBER BEAMS VM 20 42 TIMBER BEAM VM 20 / 1.9 TIMBER BEAM VIGA VM 20 / 2.15 TIMBER BEAM VIGA VM 20 / 2.45 TIMBER BEAM VIGA VM 20 / 3.6 TIMBER BEAM VIGA VM 20 / 3.9 TIMBER BEAM VIGA VM 20 / 4.9 TIMBER BEAM VIGA VM 20 / 5.9 TIMBER BEAM VIGA VM 20 / 3.3 TIMBER BEAM VIGA VM 20 / 2.65 TIMBER BEAM VIGA VM 20 / 2.9

ENKOFORM VMK Timber beam formwork ENKOFORM VMK Basic components kg PLYWOOD 0.5x2x0.021 BETO WALER-VM20 ANGULAR CLAMP PLYWOOD 2.5x1.25x0.018 BIRCH PLYWOOD 2.5x1.25x0.021 BIRCH TOOLKIT CASE PUSH-PULL PROPS CABEZAL TENSOR ESTABILIZADOR PUSH-PULL PROP SHOE CONSUMABLES CHAMFER STRIP 20x20 (50 ml)

ULMA C y E, S. Coop. Ps. Otadui, 3 - P.O. 13 20560 Oñati, Spain T. +34 943 034 900 F. +34 943 034 920 IMPORTANT: Any safety provisions as directed by the appropriate governing agencies must be observed when using our products. The pictures in this document are snapshots of situations at different stages of assembly, and therefore are not complete images. For the purpose of safety, they should not be deemed as definitive. All of the indications regarding safety and operations contained in this document, and the data on stress and loads should be respected. ULMA’s Technical Department must be...