video corpo

ALUPROP
8Pages

{{requestButtons}}

Catalog excerpts

ALUPROP - 1

Aluminium prop // Flexible, lightweight and resistant Features Advantages Solutions Basic components

Open the catalog to page 1
ALUPROP - 2

ALUPROP Aluminium prop // Features Product approved and certified ALUPROP props and towers ALUPROP Prop Maximum height with single prop: 6 m (7 m with 1 m supplement). Designed for shoring of slab formwork and shoring in general. Maximum load with 6 m single prop: . European criterion/Inner tube in bottom part: 26.1 kN. . American criterion: 39.1 kN. The lightness, great load capacity and multiple solutions provided by it are its main features. 1 Prop components 1 Base plate 2 Inner tube 3 Adjustment nut 4 Intermediate plate 5 Click European Criterion = EN 16031; American Criterion =...

Open the catalog to page 2
ALUPROP - 3

ALUPROP Aluminium prop ALUPROP Towers  Falsework can be shaped by joining the ALUPROP props and the bracing frames. We can thus achieve greater stability, allowing the building of high-rise falsework and incrementing working loads. Maximum height permitted for ALUPROP towers: 12 m. Tower components 1 Bracing frames 2 ALUPROP towers

Open the catalog to page 3
ALUPROP - 4

ALUPROP Aluminium prop // Advantages Lightweight, made of aluminium. Dual height regulation, thanks to the ALUPROP screw jack. Resistant, great load capacity. Self-cleaning thread, to elimite concrete sticking on the inner tube. Inner tube protected against disengagement of the outer tube. Fastening click between outer tube and nut. Simple and fast length regulation. Fastening click Simple prop stripping thanks to the drive nut with holes and wings. ALUPROP prop with supplement ALUPROP tower lifting Flexible: Allows intermediate working platforms. Braceable prop with bracing frames or...

Open the catalog to page 4
ALUPROP - 5

ALUPROP Aluminium prop // Solutions Configurations Prop joint: Joint between the ALUPROP Props (Maximum height: 12 m). With bolts With ALUPROP clamp Bracing between ALUPROP props and towers With bracing hook and tube With bracing frames Slab formwork with ALUPROP VR Table pre-assembled slab formwork with MK waler VR Table pre-assembled slab formwork with VM-20 beam

Open the catalog to page 5
ALUPROP - 6

ALUPROP Aluminium prop ENKOFLEX timber beam formwork CC-4 aluminium slab formwork ENKOFORM HMK civil engineering slab formwork Other propping Shoring in cut-and-cover tunnels Shoring in single-sided wall formwork Shoring in inclined walls

Open the catalog to page 6
ALUPROP - 7

ALUPROP Aluminium prop ALUPROP clamp Swivel bracing hook Universal tripod ALUPROP spindle

Open the catalog to page 7
ALUPROP - 8

ULMA C y E, S. Coop. Ps. Otadui, 3 - P.O. 13 20560 Oñati, Spain T. +34 943 034 900 F. +34 943 034 920 IMPORTANT: Any safety provisions as directed by the appropriate governing agencies must be observed when using our products. The pictures in this document are snapshots of situations at different stages of assembly, and therefore are not complete images. For the purpose of safety, they should not be deemed as definitive. All of the indications regarding safety and operations contained in this document, and the data on stress and loads should be respected. ULMA’s Technical Department must be...

Open the catalog to page 8

All ULMA catalogs and technical brochures

  1. CAT_ORMA 80_EN

    16 Pages

  2. CAT_ORMA 60_EN

    74 Pages

  3. COMAIN

    8 Pages

  4. BTM

    8 Pages

  5. BRIO

    16 Pages

  6. BIRAMAX

    8 Pages

  7. MK system

    28 Pages