SLOT GRATINGS
8Pages

SLOT GRATINGS The SLOT Drainage is part of an integral system, consisting of a discrete slot, a channel body and an access unit for an optimal maintenance of the drainage system. It is an inverted “T” or “L” shaped grating model, that stands out mainly for its aesthetics, since it integrates perfectly in the pavement (either concrete, paving stone or tiles) achieving a total blend with the urban landscape. Supports a load class up to D-400 according to Standard EN1433.

GRATINGS CLASSES The grating can be either single or double slot for greater hydraulic efficiency, and offset to install close to walls. SINGLE DRAIN REDUCED HEIGHTS Minimal visual impact for limited heights. SINGLE SLOT Aesthetic solution. Available in GALVANIZED STEEL as well as in STAINLESS STEEL (AISI 304 and AISI 316L) for the most demanding of hygiene. Please consult our technical department with any queries regarding the application of materials and installation. 156 DOUBLE SLOT Same solution with greater hydraulic capacity. OFFSET SLOT GRATE Ideal solution for areas near walls.

DRAINAGE SYSTEM WITH SLOT GRATING Pavement Interior frame Exterior frame Sump unit Steps to follow for the correct removal of the access unit and cleaning of the drainage system. 1. Identify the access unit, insert the two rods from the opening of the slot and turn. 2. Lift the access unit with the bars and set aside. 3. Remove the bucket located in that grating. 4. Empty and clean the bucket before placing it again.

INSTALLATION DETAILS PAVER Compacted ground Load class EN 1433 Standard Load class Type of concrete EN 206-1 Standard HM-25 (X0) HM-25 (X0) X 100 100 Minimum Y 100* 100* distances (mm) Z 100 100 * In case of an incorrect compactation of the soil, the concrete embracement must be made up to the pavement level. Stainless steel products must be suitably protected during installation against the iron oxide dust in the atmosphere, sparks caused by cutting metals, etc. To permanently maintain its clean appearance and prevent corrosion, we recommend periodically cleaning the surfaces. Choosing the...

Load Class up to C250 EN-1433 Standard Slot grating in an inverted “T” shape that stands out for its aesthetic, since it integrates perfectly in the pavement (concrete, paving stone or tile) achieving a total blend with the urban landscape. It can be a single slot or a double slot for greater hydraulic efficiency. Supports a load class up to C-250 according to Standard EN1433. GRATINGS Type GALVANISED STEEL Intake Compatible area system 2 *Customised options available ACCESS UNITS Intake area IR100UOAMA1212H25 SIMPLE STAINLESS STEEL Compatible system *Customised options available...

Load Class up to D400 EN-1433 Standard Inverted “L” shape slot grating that stands out for its aesthetic, since it integrates perfectly in the pavement (concrete, paving stone or tile) achieving a total blend with the urban landscape. It is especially designed to be installed in areas close to walls. Supports a load class up to D-400 according to Standard EN1433. GALVANISED STEEL STAINLESS STEEL *Customised options available Compatible system

ACCESS UNITS Intake area Compatible system GALVANISED STEEL STAINLESS STEEL *Customised options available Application detail