COMPACT CHANNEL KOMPAQDRAIN®
18Pages

SYSTEM A monolithich system specially designed for areas with high traffic density by ULMA Architectural Solutions, specialists in drainage system, this novel compact channel made of polymer concrete, is suitable up to load class F900, according to standard EN-1433. Motorways, airports, service stations and other intense traffic areas require high drainage and maximum safety, requirements to which KOMPAQDRAIN® responds with a combination of features that make it unique on the market. These channels offer different surfaces according to its use.

KOMPAQDRAIN® ADVANTAGES Non - slippery surface Directional elements Special geometry to improve the grip. Drive water inwards, increasing intake. Long-lasting and resistant It is manufactured in polymer concrete, an anti-corrosive material, which offers great durability and exceptional resistance. Suitable to all class of loads. Quick installation Its compactness enables an easier and faster installation, reducing significantly the associated costs and maintenance. Channel and grating form a one-piece unit, ensuring greater rigidity. Ideal for areas with maximum safety requirements. Maximum...

The original curved design of the inlets, together with the non-slip surface and water router, achieve the novel Max Flow® effect, increasing the water speed and the drainage capacity. Moreover, the progressive widening of the orifices helps the waste pass through more easily. Therefore KOMPAQDRAIN® can drain the same volume of water with a smaller channel. CURVED DESIGN OF THE INLETS IT INCREASES THE WATER ENTRY SPEED AND THE DRAINAGE CAPACITY KOMPAQDRAIN® meets all requirements of the EN-1433 international standard of quality and reliability. PROGRESSIVE WIDENING TO PREVENT DIRT BLOCKAGE

Rapid opening geometry Sump unit Male and female horizontal/vertical alignment system Optional NBR elastomer triplelipped joint Pre-marking for vertical output with rapid opening geometry ( at register unit´s bottom ) Base sump unit with reversible position: Ø200mm front outlet and Ø200mm and Ø300mm lateral outlets Intermediate sump unit for deeper heights Different options of male and female connectors Perimeter preformed groove to facilitate joint sealing in 360º Both sides premarking for horizontal outlet with rapid opening geometry KOMPAQDRAIN® OVER

Load Class up to D400 EN-1433 Standard Linear Drainage Channel model ULMA KompaqDrain® City KVDH100, with an integral grating, presented in onepiece and manufactured by high resistant Polymer Concrete. Vandal – proof and corrosion resistant. Load class up to D-400, for all type of vehicles crossing and with reduced capture holes of 8 mm. With “V” optimized shaped and capture holes with MAX-FLOW® geometry: self-cleaning effect at a low flow, increase at maximum flow and positive opening in order to avoid dirt blockage, for areas without slope. Active surface for cutting of water sheet and...

Load Class up to D400 EN-1433 Standard Linear Drainage Channel model ULMA KompaqDrain® City KVFDH150, with an integral grating, presented in one-piece and manufactured by high resistant Polymer Concrete. Vandal – proof and corrosion resistant. Load class up to D-400, for all type of vehicles crossing and with reduced capture holes of 13 mm. With “V” optimized shaped and capture holes with MAX-FLOW® geometry: self-cleaning effect at a low flow, increase at maximum flow and positive opening in order to avoid dirt blockage, for areas without slope. Active surface for cutting of water sheet and...

Load Class up to D400 EN-1433 Standard Linear Drainage Channel model ULMA KompaqDrain® Traffic KVFD150, with an integral grating, presented in onepiece and manufactured by high resistant Polymer Concrete. Vandal – proof and corrosion resistant. Load class up to D-400, for all type of vehicles crossing. With “V” optimized shaped and capture holes with MAX-FLOW® geometry: self-cleaning effect at a low flow, increase at maximum flow and positive opening in order to avoid dirt blockage, for areas without slope. Active surface for cutting of water sheet and for its driving to uptake holes and...

Load Class up to E600 EN-1433 Standard Linear Drainage Channel model ULMA KompaqDrain® Industry KVE150, with an integral grating, presented in one-piece and manufactured by high resistant Polymer Concrete. Vandal – proof and corrosion resistant. Load class up to E-600 with surface design without protuberances to avoid vibrations in crossing vehicles, 30 x 25 mm uptake holes. With “V” optimized shaped and capture holes with MAX-FLOW® geometry: self-cleaning effect at a low flow, increase at maximum flow and positive opening in order to avoid dirt blockage, for areas without slope. Active...

Load Class up to F900 EN-1433 Standard Linear Drainage Channel model ULMA KompaqDrain® Civil KVF150, with an integral grating, presented in one-piece and manufactured by high resistant Polymer Concrete. Vandal – proof and corrosion resistant. Load class up to F-900, for heavy loads. With “V” optimized shaped and capture holes with MAX-FLOW® geometry: self-cleaning effect at a low flow, increase at maximum flow and positive opening in order to avoid dirt blockage, for areas without slope. Active surface for cutting of water sheet and for its driving to uptake holes and with non-slippery...

Load Class up to D400 EN-1433 Standard Linear Drainage Channel model ULMA KompaqDrain® City KVFDH200 with an integral grating, presented in one-piece and manufactured by high resistant Polymer Concrete. Vandal – proof and corrosion resistant. Load class up to D-400, for all type of vehicles crossing and with reduced capture holes of 16mm. With “V” optimized shaped and capture holes with MAX-FLOW® geometry: self-cleaning effect at a low flow, increase at maximum flow and positive opening in order to avoid dirt blockage, for areas without slope. Active surface for cutting of water sheet and...