TRENCH HEATERS FCHV
15Pages

TRENCH HEATERS FCHV FOR HEATING FOR COOLING VENTILATION FAN ASSISTED • 10 models • Stainless steel casings • 2 and 4 pipes versions • Wet cooling and dry cooling ready • Remarkably low noise level • Tested according to EN16430 in independent accredited laboratory • 10 year warranty for casings and heat exchangers • Fans with most economical and quiet EC type motors • High rise of cooled air FCHV • Excelent compatibility with heat pumps and condensate boilers • Max operating pressure 25 bar • Possibility to control up to 30 units with 1 room thermostat • Highly efficient and economic copper– alu inium heat exchangers m • Safe voltage of fans – 24V (DC) • Supply air filters are in standard set • Reversible reinforced profile grilles • All fixing brackets and bolts have sound proofing elements • Possibility to change level of casing at any time during exploitation (wh

TRENCH HEATERS FCHV FCHV are among the most powerful trench heaters designed for heating and cooling. In addition, it has an option to supply air from a ventilation system into the room. Ventilation ducts are connected directly to the casing from the side of the room. In this way, fresh air bypasses the heating-cooling unit and a wide stream of air is supplied via the window. Both heated and cooled air is raised right up the ceiling to result in an even distribution throughout the room. 4 and 2 pipe connection versions are available. The 4 pipe connection guarantees maximum flexibility,...

Especially quiet operation We have achieved exceptionally low noise levels using extremely quiet EC fans and by the optimisation of their rotational speed and design of the devices. Tested according to EN16430 The outputs of all products manufactured by Konveka have been tested by independent accredited laboratories according to the latest standards. With us, 1 kW means 1 kW. All body parts are made of stainless steel Stainless steel provides 100% corrosion protection for an indefinite time. It is also 54% stronger and 45% harder than carbon steel, so it can withstand loads during...

Inner stainless steel casing Brackets for heat exchanger Hydraulic connections cover Casing’s stiffening elements Protective - decorative grille (optional) Covers for holes for air ducts Copper - aluminium heat exchanger Stainless steel casing Height adjustment and vertical load supporting bolts Noise isolating elements for adjusting screws Casing fixing to the floor brackets 19 Noise isolation elements for floor brackets 20 Pipe sealing and protection elements Cable sealing and protection elements Plugs for unused casing holes Anodized aluminium frame; colour matches the colour of grille...

TECHNICAL DATA Length Width Height = installation height Type of fan motors Fan operating voltage Fan speed control voltage Thread of hydr. connections G 1/2“ Thread type of hydr. connections inner FCHV4 115 A3 1 : 4,5 1 / 1 1 side Position of the hydr. connections Operating pressure 25 bar Operating temperature 2 - 120°C Designed by EN16430 certified outputs Heat outputs, W Sensible cooling outputs, W Sound levels Inlet fresh Air flow air flow m3/h rate, m3/h

Sensible cooling outputs, W Sound levels Length of heat exchanger, mm EXAMPLE OF CONNECTIONS WINDOW SIDE FCHV2 Thermostatic valve, straight Thermostatic valve actuator Straight lockshield valve INSTALLATION FEATURES • Side with heat exchanger is always mounted closer to the window (wall) • Energy carrier supply pipes has to be connected to heat exchangers connectors which are further from the fans • Energy carrier outlet pipes has to be connected to heat exchangers connectors which are closer to the fans • Height of the device can be adjusted at any time of exploitation (when installed in...

TECHNICAL DATA Length Width Height = installation height Type of fan motors Fan operating voltage Fan speed control voltage Thread of hydr. connections G 1/2“ FCHV4 115 Thread type of hydr. connections inner A3 1 : 4,5 1 / 1 Position of the hydr. connections 1 side Operating pressure 25 bar Operating temperature 2 - 120°C Designed by EN16430 certified outputs Heat outputs, W Sensible cooling outputs, W Sound levels Inlet fresh Air flow air flow m3/h rate, m3/h

Sensible cooling outputs, W Sound levels Inlet fresh Air flow air flow m3/h rate, m3/h Heat outputs at specific temperatures are available at www.konveka.lt Model Length of heat exchanger, mm WINDOW SIDE Thermostatic valve, straight Thermostatic valve actuator Straight lockshield valve INSTALLATION FEATURES • The side with the heat exchanger is always mounted closer to the window (wall) • Possibility to connect pipes through the side or end of the convector • The 4-pipe heat exchanger has two independent circuits. They are connected to the heating and cooling systems on both sides of the...

ACCESSORIES THERMOSTATIC VALVE TVS15 Controls flow of energy carrier. Controled by thermal actuator TA24 LOCKSHIELD VALVE (STRAIGHT) LS15 Opens, closes or limits flow of energy carrier Controls flow with thermoelectric actuator For energy carrier opening, closing and presetting of maximal flow Provides possibility to close flow and disconnect heat exchanger from heating system without draining Provides possibility to close flow and disconnect heat exchanger from heating system without draining LOCKSHIELD VALVE (ANGLE) LA15 Opens, closes or limits flow of energy carrier THERMOSTATIC VALVE...

CONNECTING ONE FCHV TO ROOM THERMOSTAT ROOM THERMOSTAT RTB24 TRENCH HEATER FCHV THERMOSTATIC VALVE ACTUATOR TA24 CONNECTING MULTIPLE FCHV TO ROOM THERMOSTAT ROOM THERMOSTAT RTB24 TRENCH HEATERS FCHV (UP TO 30 PCS) THERMOSTATIC VALVE ACTUATORS TA24 WIRING DIAGRAM ELECTRICAL CONNECTION DIAGRAM OF TRENCH HEATERS FCH2 Heat. valve Cool. valve VALVE ACTUATOR • Trench heaters installed in the same room are controlled based on the Master - Slave principle • Speed of fans are controlled 0-10 V by room thermostat. Voltage – 24VDC Heat. valve Cool. valve ROOM THERMOSTAT 0V Y50 YH YC SLAVE TRENCH...