TRENCH HEATERS FC FOR HEATING NATURAL CONVECTION • 396 models • Stainless steel casings • Tested according to EN 16430 independent accredited laboratory • 10 year warranty • One of the highest heat output on the market • Еxceptional rigidity of casings • Max operating pressure 25 bar • Highly efficient, rapid and economic copper - aluminium heat exchangers • Good compatibility with heat pumps • All fixing brackets and bolts have sound proofing elements • Reversible reinforced profile grille • Possibility to change level of casing at any time during exploitation (when installed in

TRENCH HEATERS FC These simple floor-mounted trench heaters FC operate on the principle of natural convection. Optimal sized and located heat exchangers and specially designed air flow separation/guiding elements result a considerable capacity even without the use of a fan, thereby allowing these convectors to operate as the main heating appliance in high energy performance buildings. Due to low inertia, can quickly increase and maintain the set room temperature, providing the room with exactly as much heat as you require just when it is required. Create an effective warm air curtain for large...

10-year warranty We are confident in the longevity of our trench heaters; therefore, we provide them with a 10-year guarantee. Tested according to EN16430 The outputs of trench heaters FC have been tested by independent accredited laboratories according to the current standards. With us, 1 kW means 1 kW. Work perfectly with low-temperature energy carriers Due to their high efficiency, FС are suitable for operating with low-temperature energy carriers, such as heat pumps and condensing boilers. Maximum operating pressure – 25 bar All the devices are factory-tested for leaks at a pressure of 30...

Casing fixing to floor brackets Casing stiffening elements Noise isolating elements for floor brackets Cover for hydraulic connections Heat exchanger fixing and protection elements Anodized aluminium frame; colour match the colour of grille Pipe sealing and protection elements Cable sealing and protection elements Copper - aluminium heat exchanger Plugs for unused holes All fasteners required for installation Protective - decorative grille (optional) Installation manual Height adjustment and vertical load supporting bolts Stainless steel casing Noise isolating elements for adjusting bolts 5-layer,...

Dimensions Length Width Height = installation height Connections to the heating system Heat exchanger thread Standart conection side Optional conection side Materials Housing Frame Heat exchanger pipes Heat exchanger fins Max operating pressure Max operating temperature stainless steel anodized aluminium copper aluminium G 1/2” (inner) right left 25 bar 2 - 120°C EN16430 certified outputs, W (75/65/20°C) Width, Height, cm cm Heat outputs at specific temperatures are available at www.konveka.com 6

ORDER CODE

ACCESSORIES THERMOSTATIC VALVE TVS15 Controls flow of energy carrier. Controled by thermal actuator TA230 or capillary thermostatic head THC LOCKSHIELD VALVE (STRAIGHT) LS15 Opens, closes or limits flow of energy carrier Controls flow with thermostatic head or thermoelectric actuator For energy carrier opening, closing and presetting of maximal flow Provides possibility to close flow and disconnect heat exchanger from heating system without draining Provides possibility to close flow and disconnect heat exchanger from heating system without draining LOCKSHIELD VALVE (ANGLE) LA15 Opens, closes...

GRILLES ALUMINIUM ROLL-UP GRILLES GRILLE PROFILE Aluminium profile - made of anodized aluminium - reinforced reversable double T 5 4 3 profile Designed by - made aluminium /1 - does 1not shrink or crack when 1 exposed on UV or heat - the colour is exactly the same as colour of profiles Date Flexible protective pipe ALUMINIUM LINEAR GRILLES S I LV E R (A L S)

WOODEN ROLL-UP GRILLES GRILLE PROFILE Wooden profile - made of solid wood - made of aluminium - does not/ 1 1 shrink or crack when 1 exposed on UV or heat Date Flexible protective pipe ORDER CODE FOR GRILLES Type

Konveka is a full production cycle convector manufacturing company engaged in this activity since 2005. The range of products we develop and manufacture is wide: from simple natural convection convectors to complex devices with fans for heating, cooling and ventilation. Konveka is a manufacturer of high-quality and reliable convectors: We provide a 5 - 10 year warranty for all our products (except their electrical part) without any additional warranty extension fees. The capacities of all our products are determined by independent accredited laboratories according to current standards. With us,...

Konveka, UAB Vokieciu 185, LT-45251 Kaunas Tel. +370 600 05968, +370 677 06303 Email: [email protected], [email protected] w w w.k on vek a. c o m