Catalogs >
TUUCI >
MAX CENTER POST AMBIA LIGHT

MAX CENTER POST AMBIA LIGHT
5Pages

Catalog excerpts

MAX CENTER POST AMBIA LIGHT assembly & operating instructions to protect your product, please read the operating instructions before opening the parasol

Open the catalog to page 1

AMBIA LIGHT MAX CENTER POST STEP 1 Remove all packaging from in and around umbrella. STEP 3 Once you have leveled the security stem using the base installation instructions, slide the post beauty cover and umbrella over the security stem (security stem is included with umbrella). STEP 2 Pull pin from cam lock and lift the handle to unlock. pin post beauty cover ELECTRICAL CORD Ensure that electrical cord is not pinched when inserting the umbrella over the security stem and when installing the beauty cover. STEP 4 Insert crank handle and unlock crank-lock button by moving to up position....

Open the catalog to page 2

AMBIA LIGHT MAX CENTER POST The ambia light kit is safely stored in a separate packaging box. steel wires kit includes: ambia light 2 screws allen key bottom light cover STEP 8 To install ambia light release tension from the steel wires by slightly cranking umbrella counter-clockwise. Slightly raise lower hub If more slack is needed when mounting ambia light. light fixture pins STEP 9 Position ambia light in place by snapping-in the 2 post pin holes and the light fixture pins. See image for details. Note: The half portion of the light which has no bottom will need to coincide with the cable...

Open the catalog to page 3

AMBIA LIGHT MAX CENTER POST screws STEP 10 Insert screws on both sides, do not tighten screws until both screws are in place. Once both screws are place tighten with provided allen key. STEP 11 Connect light cables

Open the catalog to page 4

AMBIA LIGHT MAX CENTER POST STEP 12 Install/snap-in place bottom light cover STEP 13 Connect the electrical cord to an outlet. STEP 14 Confirm the abmia light works by pressing the power button located on power supply cover STEP 15 When not in use the canopy must be carefully folded and secured with the tie-strap. Note: close umbrella during wind conditions that exceed manufacturer’s specifications power button Power Supply: Input Voltage Input Current Output Voltage Output Power

Open the catalog to page 5