INTELLIGENT ELECTRO-INSTALLATION
99Pages

INTELLIGENT ELECTRO-INSTALLATION TECHNICAL CATALOGUE

ANNUAL TURNOVER iNELS INSTALLATION 13 BRANCHES OVER THE WORLDS EXPORTING COUNTRIES modern antistatic personal access to more more than 30 engineers spaces, 2x fully auto- than 70 sales representa- vide technical support tives in ELKO EP Holding production lines, provides impeccable existing products services and superior products at an affordable price.

Choose the right one! WIRELESS ELECTRICAL INSTALLATIONS If you are going to renovate the house but, you do not want to interfere with the existing wiring, take advantage of our wireless solutions. The communication between the components works wirelessly at 868-916 MHz, using our unique RFIO and RFIO2 protocols. Both are proprietary ELKO EP wireless protocols , which have a completely unique structure. Are you building a new house? Then you should consider a BUSbased solution. A BUS in this sense is a data conductor that is distributed in the walls across the entire home. As opposed to a...

BUS electro-installation The BUS electro installation iNELS BUS System is a unique solution for electrical installation in the implementation of new projects of houses, villas, apartment buildings, office buildings, hotels, restaurants, wellness centres or perhaps even warehouse or production hall. The ability to deploy this solution in such a wide variety of different buildings with various purposes and uses lies in its modularity. Thanks to the modular design, the system is very flexible and allows on the one hand, a solution of single-purpose tasks such as control of lighting in...

Catalogue content

Catalogue content

Overview of system units System units Central unit Central unit Central unit Power supply Switching actuators Dimming actuators Shutter actuator Universal dimming actuator, 2-channel Analog-digital converter Digital-analog converter Digital-analog converter Fan Coil Control Actuator Binary input units Binary input units Binary input units Binary input units, 14-channel Input units

MI3-02M/EHT External master BUS with Ethernet communication BPS3-01M BPS3-02M BUS separator from power supply DA3-06M Dimmer Actuator, 6-channel Lighting control LBC3-02M Dimming actuator for electronic ballasts, 2-channel DCDA-33M Dimming actuator for LED sources, 3-channel RFDA-73M/RGB Dimming actuator for LED (RGB) strips, 3-channel EMDC-64M Gateway iNELS - DALI/DMX DMD3-1 DLS3-1 Combined motion and light Luminescence sensor intensity detector

Overview of system units Wall units and controllers Elko smart touch screen Glass switch button Glass switch button Glass switch button Central unit Glass card reader Glass door bell Glass bedside panel, left Glass bedside panel, right Glass bedside panel, left Glass bedside panel, right IDRT3-1 Digital room thermo-regulator Hotel solutions

WMR3-21 Wall card reader WSB3-20 WSB3-20H Wall switch button WSB3-40 WSB3-40H Wall switch button Glass wall card reader GCH3-31 Glass card holder EHT3 GRT3-50 Elko Hotel Touch screen Glass room thermo-regulator GSP3-100 Glass switch panel GSB3-60/S Glass switch button with symbols GSB3-20/S GSB3-40/S Glass switch button with Glass switch button with symbols symbols

Overview of system units Multimedia Radio NOW PLAYING: Radio LARA Radio LARA Intercom Connection Server iNELS Touch Panel 10" Internet radio player Multifunctional communications devices Server for integration of third parties Audio zone player Ethernet-IR transmitter iNELS Home Control application Application for Android phones Application for Android tablets Internal antenna External antenna Thermo sensors

Wired electro-installations Smart home & building solutions

CU3-01M, CU3-02M | Central unit EAN code • CU3-01M and CU3-02M are central units' of the iNELS system and mediators, between user software interface and controllers, units and actuators connected to the BUS. • It's possible to directly connect up to 2 lines of BUSes in to CU3-01M and CU3-02M, and on each BUS we can connect up to 32 iNELS3 units. • The main difference between CU3-02M and CU3-01M is that CU3-02M is moreover equipped by RF module which enables communication with selected units from iNELS RF Control system. • Central units CU-01M (02M) support also peripheral units from iNELS2...

Technical parameters CU3-03MLED Indication Green LED RUN: • CU3-03M is a new, enhanced version of CU3-01M and CU3-02M. • The new HW equipment allows communication with the DALI bus to connect up to 64 electronic ballasts (the internal power supply of the CU3-03M is capable of supplying connected ballasts up to a nominal value of 64 mA). • RF Communication Interface for Controlling Wireless Receivers iNELS RF Control (the current list of supported receivers is available in the iNELS Installation Guide). • The CU3-03M is equipped with three Ethernet ports, one for Ethernet (100 Mbps)...

CU3-01M, CU3-02M, CU3-03M Installation BUS: • Two-wired BUS with an arbitrary topology (not only to be as closed circle). • With its own modulated communications on the DC voltage supply. • One line of BUS allows you to connect up max. 32 units of iNELS3, or iNELS2 if you use external master MI3-02M/iNELS2. • The current load of one line is max. 1A. When connecting units which draw greater than 1A, BPS3-01M with 3A sampling can be used. • Maximum length of the BUS is approximately 500 m (depends on the voltage drop). • Recommended cable: - iNELS BUS Cable - Twisted pair of copper wires with...

24 V battery battery 1 battery 2 EBM system BUS can be connected to line topology max. 8 units MI3-02M or EMDC-64M and one GSM3-01M. maximum of 32 units per line BUS; maximum 1A per line BUS Basic system connection with the central unit CU3-01M 17

PS3-100/iNELS | Power supply EAN code Indication LED switching power supply works correctly output voltage 27V is correct (Uout>24V) output voltage 12V is correct batteries are not recharged switching power supply not working correctly - UPS mode output voltage 27V is correct (UOUT>24V) output voltage 12V is correct batteries are not recharged switching power supply works correctly output voltage 27V is correct (UOUT>24V) output voltage 12V is correct batteries are recharged switching power supply not working correctly - UPS mode low output voltage 27V (21V<UOUT<24V) output voltage 12V is...