The only injection molded Trench Drain • Non-corrosive High Density Polyethylene. • 235 p.s.i industrial strength • H-20 wheel load rating Comes completely assembled. One unit. One price. No Extras. Interlocking Molded Ends No need to remove the grate during installation. Simply snap the trenches together for a TufTite® free-flowing fit. Simply remove an end cap, extend the trench to any length, and re-install the end cap. Safe, square 1/2” x 1/2” openings. Molded of specially formulated HDPE with no foam or fillers. The trench may be field cut with a hand saw, and capped with a male end cap or a TR1-D4 End Drain Stainless Screws The grate is held in place with 10 Type A-SmS screws. Molded-In Ribs Provide exceptional vertical compression strength unequaled by other trench designs. Americans With Disabilities Act Regulation 4.5.4: If gratings are located in walking surfaces, then they shall have spaces no greater than 1/2” (13mm) wide in one direction. If gratings have elongated openings, then they shall be placed so that the long dimension is perpendicular to Three bottom drains are molded in. Knock-out membranes allow trench to be drained with 2” or 3” Schedule 40, or 4” 90° injection molded HDPE corner unit for Trench Drain. Molded interlocking ends for simple, snaptogether installation. Comes assembled with grate and 6 Type A-SmS stainless screws. ADA compliant. Male End Drain snaps on female end of Trench Drain. Accepts: • 4” SDR35-3034 pipe • 4” 2729 pipe • 4” corrugated pipe when used with an MF-4 pipe connector See additional drainage products on reverse side To connect 4” corrugated pipe to the bottom of Trench Drain or to the End Drain TR1-D4. Provides a watertight fit. Gender Changer Changes male end to female (TR1-GCF) or female end to male (TR1-GCM) Drainage and Septic Products

Drainage Products Screw holes. AD1 Area Drain with ADA Grate Grate complies with Americans with Disabilities Act. • Rugged, Non-Corrosive Molded of gray High-Density Polyethylene. Ribbed bottom provides exceptional compression strength. • Atrium Drain Drain hole is protected by a 1-3/4” high atrium screen. A build-up of small debris won’t stop the flow. • Steady Flow The contoured bottom directs all water to the drain. Standing water is eliminated. Choice of three size drain pipes. • Easily Installed - Anywhere! Only 5” deep. Lightweight, easy to handle, and useable with 3”, 4”, or 6” pipe. No...