video corpo

Type ST · XT
8Pages

{{requestButtons}}

Catalog excerpts

Type ST · XT - 1

Steel Doors TROX GmbH Telephone +49/2845/2 02-0 Heinrich-Trox-Platz e-mail trox@trox.de

Open the catalog to page 1
Type ST · XT - 2

Contents · Description Description Construction Standard sizes · Installation details Low leakage steel doors are designed for use in air conditioning systems, plant rooms, filter plenums, air handling units etc.. If exposed to the weather the steel doors should be protected with anti-corrosion paint. The stable construction guarantees a very low leakage even with high pressure differentials. Good sound insulation is also achieved in the construction with additional acoustic treatment (X versions). 2 Product range Accessories · Technical data Order details

Open the catalog to page 2
Type ST · XT - 3

Construction Type ST · STV · XT · XTV ST – Double skinned door in galvanised sheet steel with rockwool insulation: door thickness d approx. 44 mm – Installation frame (angled section or U-channel) with or without galvanised builders cleats welded in position – Double lever locking devices (2 pieces) diecast aluminium, enables operation from both sides – APT rubber seal, temperature resistant up to 90 °C – Maximum pressure differential 1000 Pa (pressure should push the door against the frame); leakage Ȃ 2 m3/h XT As for type ST, but also with additional acoustic treatment XTV As for type...

Open the catalog to page 3
Type ST · XT - 4

Construction Type ST-D · STV-D · XT-D · XTV-D ST-D XT-D As for type ST-D, but also with additional acoustic treatment – Double skinned door of galvanised sheet steel with rockwool insulation; door thickness d approx. 44 mm – Installation frame (angle section or U-channel) with screwfixed centre mullion and with or without galvanised builders cleats welded in position – Double lever locking devices (2 pieces per door) in diecast aluminium, enabling operation from both sides – APT rubber seal, temperature resistant up to 90 °C – Maximum pressure differential 1000 Pa (pressure should push the...

Open the catalog to page 4
Type ST · XT - 5

Standard Sizes · Installation Details Standard sizes Type No. of builders cleats per B dimension No. of builders cleats per H dimension All B and H dimensions can be combined. Intermediate dimensions (B and/or H dimension) can be supplied. Outside pressure pushing door against frame Builders cleat Outside pressure pushing door against frame Installation details Single door construction shown For double door construction, 1 additional builders cleat on the B dimension Angle section Installation frame Dimensions in mm Angle section Type ST · STV · ST-D · STV-D XT · XTV · XT-D · XTV-D

Open the catalog to page 5
Type ST · XT - 6

Product Range Product range Construction Complete with Basic construction Rim cylinder dead lock Mortise dead lock, designed to accept a profiled cylinder (profile cylinder by others) Glass inspection port Pressure relief valve Removable front locking levers (of the double lever locking device) Rim cylinder dead lock Basic construction with glass inspection port Pressure relief valve Removable front locking levers Basic construction with pressure relief valve Mortise dead lock, designed to accept a profiled cylinder (profile cylinder by others) Rim cylinder dead lock Mortise dead lock,...

Open the catalog to page 6
Type ST · XT - 7

Accessories · Technical Data Type XT · XTV · XT-D · XTV-D in dB: Sound reduction index in dB: Sound reduction index rating in Hz: Frequency XT · XTV (doors on both sides of wall opening) Note: Before mortaring in place, align door carefully; when the door is closed, the seal must be in contact with the door frame all the way around. * Reference curve from DIN EN ISO 717 Arrangement of accessories Type ST · STV XT · XTV Type ST-D · STV-D XT-D · XTV-D right hand construction shown Type ST · STV XT · XTV ST-D · STV-D XT-D · XTV-D ቩ Mortise lock, designed for mounting a profiled cylinder ቪ...

Open the catalog to page 7
Type ST · XT - 8

Order Details Order code These codes do not need to be completed for standard products Types ST STV XT XTV ST-D STV-D XT-D XTV-D Standard sizes B x H in mm (see page 5) T Installation frame (see page 6) E E 11, 13, 15, 21 E Z E (if not given 11 is supplied) E U Construction Right hand “R” Left hand “L” (only for ST · STV · XT · XTV; if not specified, “R” is supplied) Right hand construction Left hand construction Order example Low leakage steel doors comprising: – Double skinned door in formed galvanised sheet steel to DIN EN 10142, without spot welds visible on outside of door; with...

Open the catalog to page 8

All TROX catalogs and technical brochures

  1. X-GRILLE Cover

    18 Pages

  2. ATVC-100

    8 Pages

  3. X-CUBE Compact

    12 Pages

  4. ARR

    2 Pages

  5. VMRK

    4 Pages

  6. VFR

    8 Pages

  7. Tunnel dampers

    20 Pages

  8. FKS-EU

    20 Pages

  9. CAK

    6 Pages

  10. Type NL

    8 Pages

  11. Type PKV

    7 Pages

  12. Type BID

    8 Pages

  13. Type QLI

    8 Pages

  14. LVC

    9 Pages

  15. RM-O-3-D

    7 Pages

  16. RM-O-VS-D

    7 Pages

  17. FK-EU

    56 Pages

  18. EK-01

    14 Pages

  19. XSA

    12 Pages

  20. MSA

    12 Pages

  21. SCHOOLAIR-V

    12 Pages

  22. SCHOOLAIR-B

    12 Pages

  23. FSL-B-SEK

    4 Pages

  24. DID632

    20 Pages

  25. DID300B

    12 Pages

  26. DID312

    16 Pages

  27. AGW

    24 Pages

  28. AGS

    24 Pages

  29. DLQ-1...4-AK

    13 Pages

  30. DQ/ADQ

    9 Pages

  31. DLQ/ADLQ

    10 Pages

  32. DLK-Fb

    4 Pages

  33. VD

    10 Pages

  34. QSH · ISH

    8 Pages

  35. DLQL

    12 Pages

  36. X-CUBE

    16 Pages

  37. FV-K90

    12 Pages

  38. AK-Ex

    5 Pages

  39. JZ-RS

    5 Pages

  40. FKRS-EU

    28 Pages

  41. Star Climate

    16 Pages

  42. SD

    10 Pages

  43. AIRNAMIC

    12 Pages

  44. XARTO

    12 Pages

  45. X-CUBE COMPACT

    10 Pages

Archived catalogs

  1. Slot Diffuser

    11 Pages