Catalogs >
TROX >
ATVC-100

ATVC-100
8Pages

Catalog excerpts

Automatic exhaust valve Type ATVC-100 TROX HESCO Schweiz AG Walderstrasse 125 Postfach 455 CH - 8630 Rüti ZH

Contents · Applications · Realisation · Operation · Advantages Contents Application · Realisation · Operating · Avantages ____ 2 _ Dimensions · Installation __________________________ 3 Installation ________________________________ 4 and 5 Technical Data ___________________________ 6 __ Order Details ___________________________________ 7 Application Automatic exhaust valves type ATVC-100 are suitable for installations in multi-storey residential buildings, office blocks, hotels, schools etc., with a central exhaust air system. ATVC100 can be installed either in new or renovated buildings....

Open the catalog to page 2

Dimensions · Installation Choice of unit The valve is selected on the following data base: static pressure drop Δps (Pa) basic air volume rate ‡o (m³/h) operating air volume rate ‡ (m³/h) Technical characteristics Nominal voltage: Power consumption, operation: Max. ambient temperature: Nominal diameter: The static pressure drop and only one of the two air volume rates can be freely selected. The following details can be found in the diagram: - number of rotations - residual air volume rate - acoustic data Please note that the respective operating air volumen rate characteristic must be...

Open the catalog to page 3

Installation Adjusting of the basic air volume rate ‡o 1 2 3 4 5 Valve housing Valve disc Electro-thermal drive Tappet Knurled nut The automatic exhaust valve is closed by delivery (basic air volume rate ‡o = 0 m³/h). To set the valve to the basic air volume rate, proceed as follows: Place the exhaust valve on a firm base, e.g. a table, as shown and loosen the brass knurled nut «5» clockwise approx. by one rotation. Hold the exhaust valve at the electric drive and, with one finger of the free hand, rotate the valve disc «2» anticlockwise by the required number of rotations. Place the...

Open the catalog to page 4

Electrical Connection Location of the electric cable It is best to lead the cable into the round air exhaust ducting. Plug «A» can be removed from the plate «C» after removing the central screw «B». With the central screw «B» removed from the plug «A», the insert «F» can be forced out with a screw-driver at the point marked «D». C Plastic tube (e.g. KRF 11), position: side or top Connection diagram P = Phase conductor N = Neutral E = Earth P IP54 EC, SEV approval, specially-insulated equipment with splash-protection

Open the catalog to page 5

Definitions LwA dB(A)= Sound power level (tolerance ± 2 dB) ‡o m³/h = Basic air volume rate ‡ m³/h = Operating air volume rate Δps Pa = Pressure drop Δps n = Rotations at the disc 0 = Works setting (closed) 1 – 4 100 = Minimum settings 1 - 4 rotations 80 45 dB(A) Solution 40 dB(A) 60 – Number of rotations for minimum setting 1 50 35 dB(A) – Basic air volume rate ‡o = 10 m³/h 40 dB(A) – Sound power level for: 40 30 dB(A) Basic air volume rate Operating air volume rate approx. 30 35 dB(A) LwA = 25 dB(A) 20 LwA = 30 dB(A) 15 30 Débit d'air de base ‡o [m³/h] 80 Example (as plotted) 60 50 Given...

Open the catalog to page 6

Order Details Order codes No details for standard products ATVC-100 / Type Automatic exhaust valve type ATVC-100 0 = white plastic (standard) S1 Spray painted according to RAL (all = RAL colours and brilliance on request) Text for tendering purposes Automatic exhaust valve brand type ATVC-100 with electrothermal drive, for connecting 230V / 50Hz mains, adjustable air volume rate, for exhaust air systems, SEV tested.

Open the catalog to page 7