TROCELLEN ROLLS Insulation of technical installations Thermal insulation

TROCELLEN CLASS ROLLS TROCELLEN is a closed cell, chemically cross-linked polyolefin foam (a group which includes PE, PP, copolymers, EVA, etc.). Available versions: Dark grey, does not contain flame retardants. Over 7 mm thickness conforms to the USA -FMVSS 302 and German DIN 75200 standard of flame containment at less than 100mm/min N type, laminated with scratch resistant embossed metallic polyethylene film N type, laminated with scratch resistant embossed black polyethylene film N type, laminated with a metallic polyester film Light grey in colour, produced with flame retardant additives...

The following are used to fit the rolls: "AD" TYPE ROLLS (ADHESIVE) • The rolls are available with self-adhesive for thicknesses of 3-6-8-10 and 12 mm. • For thicknesses of 16-20-24-30 mm consult the technical office in the production plant. For hot air heating systems where temperatures may reach 60 - 80 °C we advise to use MATIBLOCK® glue which should be spread on the sheet (object to be installed) and the duct. The most common uses are: • Insulation of airduct and hot and cold water storage tanks • Insulation of large diameter pipes • Adhesive seals TECHNICAL DATA TROCELLEN ROLLS

SEALS - TAPES - STRIPS - GLUE TROCELLEN SEALS, THICKNESS 3-6 mm These seals should be used to join metal elements (duct flanges, the edges of refrigeration cell doors and ventilation vents) to guarantee hermetic sealing and vibration damping. Acrylic self-adhesive. TROCELLEN SEALS Range: • thickness 3-6 mm, types N and CL1 EPDM SEALS The material used for this type of sealant is EPDM/other polyolefin resin foam, offering superior compressive strength and excellent spring. Range: • thickness 3-4-5 mm AL/CL1, AL/CL1 HR TAPES AND ALUMINIUM TAPES (adhesive) To guarantee a good aesthetic finishing,...

STORING THE ADHESIVE ROLLS AND MATIBLOCK® GLUE To guarantee correct storage of the adhesive rolls, you must follow the recommendations below: MATIBLOCK® GLUE • T he ideal storage temperature should always be kept within 10 °C and - 25 °C. Adhesives are sensitive to jumps in temperature and may loose their adhesive properties (too hot) or become brittle (too cold), leading to the risk of peeling-off after installation • F or no reason whatsoever should the adhesive rolls be stored outdoors: humidity, water and sun will seriously alter the behaviour of the adhesion • Avoid storing the rolls near...

Chemically cross-linked, closed cell polyethylene rolls, density 30 kg/m3, anthracite grey, Class 1. • Thermal conductivity coefficient at 40 °C (X-value)= 0,040 W/mK (0,034 kcal/mh°C) • Water vapour diffusion factor (p-value) > 2000 Chemically cross-linked, closed cell polyethylene rolls, density 30 kg/m3, light grey, Class 1, laminated with protective embossed metallic film. • Thermal conductivity coefficient at 40 °C (X-value)= 0,040 W/mK (0,034 kcal/mh°C) • Water vapour diffusion factor (p-value) > 12000 Chemically cross-linked, closed cell polyethylene rolls, density 30 kg/m3, light grey,...

TROCELLEN ROLLS

Lead Plant Sales office Via Dante, 3 Lot 2213, Kg. Batu 9 Kebun Baru, Jalan Kasawari 42500 Telok Panglima Garang Selangor Darul Ehsan, Malaysia Ph. +60 3 3122 1213 Fax +60 3 3122 1211 Bureau de vente 2 rue de Commeres, Immeuble les Peupliers F-78310 Coigneres, France Ph. +33 (0) 130 85 93 40 Trocellen is a multinational company owned by Furukawa Electric Co. Ltd, internationally renowned for the design and manufacture of cross-linked polyolefin foam. Through its different Business Units, the company is able to meet the specific needs of the market with a wide range of products and solutions....