Trocellen ® ISOCOMPACT Piping Application Thermal insulation

ISOCOMPACT® TROCELLEN is a closed cell, chemically cross-linked polyolefin foam (a group which includes PE, PP, copolymers, EVA, etc.). TROCELLEN ISOCOMPACT It is developed to meet higher technical requirements, in which very high thermal insulation is expected. Indicated for insulation of pipe in unheated areas and outdoor. If installed on outdoor pipes, UV protection is required. Sleeves size: • Length: 2,00 m • Thickness: 30, 40, 50 mm • S tandard diameter: 1/2” (22 mm) to 4” (114mm). Thickness is in compliance with law no. 10/91. For an easier application, sleeves are equipped with special...

INSTALLATION On systems under construction, sleeves can be installed on the pipes that shall not undergo further inspection. On existing systems, sleeves are cut in the longitudinal sense (on request, the first sleeves are supplied cut for half their thickness, for an easier application). For the gluing of the cut surfaces, use the specific MATIBLOCK® glue, applied with a brush to both surfaces; wait until the glue is dry (test by touching), then join the two parts with a slight pressure. The fastening efficiency is proved by immediate tear resistance. With temperature between 20 and 30 °C, the...

INSULATION OF PIPE IN UNHEATED AREAS AND OUTDOOR TROCELLEN ISOCOMPACT

THERMAL INSULATION IN HEATING SYSTEMS TROCELLEN ISOCOMPACT RANGE (length 2,00 m) EXTERNAL PIPE DIAMETER (pollici) (mm) - TROCELLEN CLASS AL ISOCOMPACT (CE MARKED) Thickness recommended in the boiler room, cave, garage, outdoor pipes and underground passages Sleeves with thickness 50 mm, necessary for diameters 2” (61 mm) to 6” (168 mm), are manufactured using sleeves with thickness 12 mm, as internal core, and sheet thickness 3-4 mm, multi-layered winding. ORDINARY SUPPLEMENT OF THE OFFICIAL GAZETTE N. 242 OF OCTOBER 14, 1993 ANNEX B DECREE OF THE PRESIDENT OF THE REPUBLIC August 26, 1993, no....

ANTI-CONDENSATION INSULATION FOR PIPE CONDITIONING AND COOLING The insulation thickness (referred to Mollier’s diagram) is calculated based on the fluid temperature in the pipe, the environmental temperature of the surrounding and the relative humidity in the air. Formula for the superficial temperature t2 = surf. temperature of insulation ti = temperature of fluid te = ambient temperature d = pipe diameter s = thickness of insulation L = Neperian log. (2.3 Log) λ = thermal conductivity coefficient in kcal/hm °C INSULATION THICKNESS (mm) TEMPERATURE OF PIPE (°C) ROOM TEMPERATURE AND RELATIVE...

ITEM SPECIFICATIONS TROCELLEN ISOCOMPACT -SLEEVES AL/CL1 Sleeves in closed-cell, cross-linked polyethylene foam, density 30 kg/m³, light grey. Multi-layered product, thickness 10 to 15 mm, certified in Class 1 according to UNI 8457/UNI 9174 and finished outside with an embossed, anti-scratch, metalized film. • Thermal conductivity coefficient at 40 °C (λ-value) = 0,0400 W/ mK (0,034 kcal/mh°C) • Water vapour diffusion factor (µ-value) ≥ 12000 • CFC free. TROCELLEN ROLLS AL/CL1, CL1/ALU-NET Coating for pipe with diameter higher than 168 mm, collectors and tanks with insulation TROCELLEN rolls...

INTERNATIONAL LOCATIONS Lead Plant TROCELLEN Italia S.p.A. Sales office Via Dante, 3 20867 Caponago (MB), Italy Ph. +39 02 959 621 Fax +39 02 959 62 235 TROCELLEN GmbH Mülheimer Straße 26 53840 Troisdorf, Germany Ph. +49 2241 2549000 Fax +49 2241 2549099 TROCELLEN S.E.A. Sdn Bhd Lot 2213, Kg. Batu 9 Kebun Baru, Jalan Kasawari 42500 Telok Panglima Garang Selangor Darul Ehsan, Malaysia Ph. +60 3 3122 1213 Fax +60 3 3122 1211 TROCELLEN Ibérica S.A. C/Avila, s/n 28804 Alcalá de Henares, Spain Ph. +34 91 885 55 00 Fax +34 91 885 55 01 TROCELLEN France Bureau de vente 2 rue de Comméres, Immeuble les...